Test Channels 9300/9301 (back); More data collecting

[Earl Bonovich]

First: I want to thank you all for continuing to help in the manner that you are. Each and every data request has been helping, and you all are making a major impact... You really are:

---------

Test Channels 9300/9301 are back on the air... and there is no set turn off date/time. So enjoy them while they last...

---------

More data collecting:
(I reserve the right to change this later on today... and ask you to again report your results)

Please; after posting here.
Take a moment and also report your results at: www.iamanedgecutter.com


Key Information:
1) Box model and Sw version
2) 498 y/n
3) 480 y/n
4) 481 y/n
5) 9300 y/n
6) 9301 y/n

Please report for each and every MPEG-4 compatible equipment you have...

If you don't have the required equipment (5LNB, proper multiswitches, please don't vote).

[HarleyD]

1) Box model and Sw version---HR20-700, 0x19e
2) 498 y/n-----------------------------------Y
3) 480 y/n-----------------------------------Y
4) 481 y/n-----------------------------------Y
5) 9300 y/n----------------------------------Y
6) 9301 y/n----------------------------------Y

[tsciulli]

From Santa Barbara, CA

Key Information:
1) HR20-700, 0x18a
2) 498 no for both tuners (first time it hasn't worked for me, always worked before)
3) 480 yes
4) 481 yes
5) 9300 yes
6) 9301 yes

[Hamiltony]

1- HR20-700, software version 0x18a
2- 498 i have to say no, but i did get it to tune once with slide and sound, but grey screen for me
3- 480 yes BBC confirmed working
4- 481 yes BBC confirmed working
5- 9300 yes
6- 9301 yes

hope it helps

[veryoldschool]

1) Box model and Sw version---HR20-700, 0x19e
2) 498 -Y
3) 480 -Y
4) 481 -Y
5) 9300 -Y
6) 9301 -Y

Off SWM8 and both are 720p

[vertigo235]

1) HR20-700, v 19E
2) 498, yes and no
3) 480 y
4) 481 y
5) 9300 y
6) 9301 y

edit: I had to change my response, 498 was working earlier today, but now it is not.

edit2: now 498 is working all the time again...

[RegGeek]

1) HR20-700, 0x18a, zinwell 6x8 is in use
2) 498 No
3) 480 Yes
4) 481 Yes
5) 9300 Yes
6) 9301 Yes

Previously I had been seeing the "welcome" slide and heard the music. This morning was when I last looked. But now I am getting just the black screen on 498.

Edit: 498 is not working on either tuner. Went back and did the switching tuners trick to be sure.

[loknload]

HR20-700
0x19e
480 & 481 working
498 not working (it worked earlier and now does not)
9300 working (with lip sync issues)
9301 working

Why would 498 all of a sudden go to a black screen?

[CUIllini]

1) HR20-700 0x19a
2) 498 y
3) 480 y
4) 481 y
5) 9300 y
6) 9301 y

[w84mike]

From Los Angeles area

Key Information:
1) HR20-700, 0x18a
2) 498 n, first time it hasn't worked for me, always worked before
3) 480 y
4) 481 y
5) 9300 y
6) 9301 y

[DCSholtis]

1. HR20-700 0x19e
2. 498 Tuner 1 yes, Tuner 2 Searching for Sat
3. 480 and 481 Tuner 1 yes, Tuner 2 Searching for Sat
4. 9300 and 9301 Tuner 1 yes, Tuner 2 Searching for Sat

1. H20, (Last national software, not involved in CE)
2. 498 Searching for Sat
3. 480 and 481 Searching for Sat
4. 9300 and 9301 Searching for Sat

No Multiswitch, AT9 Sidecar dish. Strong signals received on all other sats using both tuners on the HR20. Strong signals received on all other birds on the H20 as well. Switching out BBCs to verify if thats the problem now.

Switched out BBC on the H20. Still fails.

[Teststation5]

From Aztec, NM
Key Information:
At 12:18 MDT
1) HR20-700, 0x18a, H20-600 0x2024 (same results on both)
2) 498 n, first time it hasn't worked for me, always worked before
3) 480 y
4) 481 y
5) 9300 y
6) 9301 y

At 2:17 MDT
1) HR20-700, 0x18a, H20-600 0x2024 (same results on both)
2) 498 y
3) 480 y
4) 481 y
5) 9300 y
6) 9301 y

[tpm1999]

From St. Louis Area

Key Information:
1) HR20-700, 0x19E
2) 498 y
3) 480 y
4) 481 y
5) 9300 y
6) 9301 y

[rrrick8]

Key Information:
1) HR20-700, 0x19e & 2 H20-600's -2038 Same results for all machines.
2) 498- no, first time it hasn't worked for me, always worked before
3) 480 -yes
4) 481 -yes
5) 9300- yes
6) 9301 -yes

[Scooter22]

1) I have 1 HR20-100 and 1 HR20-700 both running 0x18a Running off of a Zinwell 6x16 multi-switch
2) 498 is now giving me a blank screen for the first time. It always worked before.
3) 480 works
4) 481 works
5) 9300 works
6) 9301 works

I got the same results with both receivers.

[Bob Coxner]

1) Box model and Sw version---HR20-700, 0x19e
2) 498 y/n-----------------------------------N
3) 480 y/n-----------------------------------Y
4) 481 y/n-----------------------------------Y
5) 9300 y/n----------------------------------Y
6) 9301 y/n----------------------------------Y
Waco/Temple/Bryan DMA

498 was working this morning, and has been working all along, but since the 9300/9301 test channels came on I just get a black screen and no sound.

[JC32]

getting everything except 498 did have audio earlier!

HR20-700

[Dan B]

1) HR20-700 0x18a
2) No
3) Yes
4) Yes
5) Yes
6) Yes

[shadez2270]

From Northern Georgia

1) HR20-700, 0x18a
2) 498 YES NOW
3) 480 bbc confirmed
4) 481 bbc confirmed
5) 9300 y
6) 9301 y

[UrbanDad]

From Dallas, TX
HR20-700, 0x18a
1. 498 - N - although it was working all weekend (((NOTE: as of 3:00 CDT, 498 is on - with sound)))))
2. 480 - Y
3. 481 - Y
4. 9300 - Y - National Geographic Channel
5. 9301 - Y - Discovery Channel

[jarensberg]

1) HR20-100 0x18a
2) 498 n (first time ever, always got it before)
3) 480 y
4) 481 y
5) 9300 y
6) 9301 y

3:00 PM Central - 498 coming in again.

[pfueri]

First: I want to thank you all for continuing to help in the manner that you are. Each and every data request has been helping, and you all are making a major impact... You really are:

---------

Test Channels 9300/9301 are back on the air... and there is no set turn off date/time. So enjoy them while they last...

---------

More data collecting:
(I reserve the right to change this later on today... and ask you to again report your results)

Key Information:
1) Box model and Sw version
2) 498 y/n
3) 480 y/n
4) 481 y/n
5) 9300 y/n
6) 9301 y/n

Please report for each and every MPEG-4 compatible equipment you have...

If you don't have the required equipment (5LNB, proper multiswitches, please don't vote).

1)2 HR 20-700 0x19d
2)498 y
3)480 y
4)481 y
5)9300 y
6)9301 y

[colel83]

1. HR20-100 0x18a
2. no
3.yes
4.yes
5.yes
6.yes

[n3ntj]

1) HR20-700, 0x19d
2) 498 -N (has worked fine until this afternoon)
3) 480 -Y
4) 481 -Y
5) 9300 -Y
6) 9301 -Y

Note: I do notice flickering white lines or dots across the very top of the screen on 9300. Anyone else seeing this?

[bobshults]

It's Alive!!!

HR20-700 with 0x19a
498=Y
480=Y
481=Y
9300=Y
9301=Y

Update: About 2:20CDT I was able to get slide and audio on 498 for the 1st time.

[cforrest]

Via Slingbox:

Key Information:
1) HR20-100, SW 0X18A
2) 498 N, worked last night with no problems ***Now getting 498****
3) 480 Y, but slow compared to last night
4) 481 Y, but slow compared to last night
5) 9300 Y
6) 9301 Y

[JLF]

1) H20-600 2038
2) 498 y
3) 480 y
4) 481 y
5) 9300 y
6) 9301 y

[scsweet]

From St. Louis, MO

1) HR20-100, 0x18a
2) 498 n, first time it hasn't worked for me since shortly after 498 first came on.
3) 480 y
4) 481 y
5) 9300 y
6) 9301 y

Thanks!

[birdman1]

1) Box model and Sw version---2 HR20-700's, WB6x8,0x19e
2) 498 y/n-----------------------------------Y It started woring again.
3) 480 y/n-----------------------------------Y
4) 481 y/n-----------------------------------Y
5) 9300 y/n----------------------------------Y
6) 9301 y/n----------------------------------Y

[Swheat]

Everything is working great here. I have a very plain setup. One receiver with no multiswitches.

1) HR20-700, 019e
2) 498 yes
3) 480 yes
4) 481 yes
5) 9300 yes
6) 9301 yes

[tonybradley]

As of 2:20PM.

1) Box model and Sw version.............. HR20-700, 0x18a
2) 498 y/n........................................... NO
3) 480 y/n........................................... YES, Confirmed
4) 481 y/n........................................... YES, Confirmed
5) 9300 y/n......................................... YES
6) 9301 y/n......................................... YES

Summary, Receive everything except Confirmation Slide on 498.

[vizaweb]

Twin Cities:

Key Information:
1) HR20-700, 0x18A
2) 498 N (no longer - black screen, no sound)
3) 480 y
4) 481 y
5) 9300 y - Audio is off from video feed. It is the video that is slightly delayed.
6) 9301 y

[sadude39]

From San Antonio, TX

1) H20-100 0x2021
2) 498 No....have been getting it just fine before
3) 480 Y
4) 481 Y
5) 9300 Y
6) 9301 Y

Gorgeous picture on both channels...not sure why not getting 498 now after seeing it before.....

[yaddayaddayadda]

1)HR20-700 running 0x18a
2) 498 - N (previously had it)
3) 480 - Y
4) 481 - Y
5) 9300 - Y
6) 9301 - Y

[STEVEN-H]

HR20-700
x19E
BBC rev 3

Key Information:
1) HR20-700, 0x18a
2) 498 no for both tuners (worked before this test on both tuners )
3) 480 yes
4) 481 yes
5) 9300 yes audio sync problem
6) 9301 yes

[bnglbill]

HR20-700, 0x19d
1. 498 - N (grey screen) - although it was working before today
2. 480 - Y
3. 481 - Y
4. 9300 - Y - National Geographic Channel
5. 9301 - Y - Discovery Channel

[noladaoh]

HR20-700, 0x18a

1) 498 N
2) 480 Y
3) 481 Y
4) 9300 Y
5) 9301 Y

[say-what]

I can only report for system 2 in my sig, as I'm at work and that's the only one I can get via slingbox.

1) Box model and Sw version: HR20-700, 19d
<strike>2) 498 y/n - no, black screen now (has always worked until now, last checked about 6:30 am)</strike>
3) 480 y/n - yes
4) 481 y/n - yes
5) 9300 y/n - yes
6) 9301 y/n - yes

[longrider]

HR20-700 running 0x19e, H20-600 running 2038

For the first time since it was launched, both boxes give a blank screen on 498. All other tests passed, including checking both tuners on the HR20.

Another post reporting hitting pause brought 498 up, no such luck for me. Repeated pause/play had no effect on the gray screen

Another update: At 1:38 PM MDT 498 is working again

[beakor]

1. hr20-100 0x18a
2. 498 - no first time it hasn't worked for me, always worked before
3. 480 - yes
4. 481 - yes
5. 9300 -yes
6. 9301 - yes


same results for my h20-600, has been exactly the same as the above hr20

[Smthkd]

1) Box model and Sw version---HR20-700, 0x19e
2) 498 y/n-----------------------------------N - Blackscreen now
3) 480 y/n-----------------------------------Y
4) 481 y/n-----------------------------------Y
5) 9300 y/n----------------------------------Y
6) 9301 y/n----------------------------------Y

1) Box model and Sw version---H20-600, 0x2038
2) 498 y/n-----------------------------------N - Blackscreen now
3) 480 y/n-----------------------------------Y
4) 481 y/n-----------------------------------Y
5) 9300 y/n----------------------------------Y
6) 9301 y/n----------------------------------Y

[ikeb]

1) h20 0x2021
2) 498 -Y (black screen)
3) 480 -Y
4) 481 -Y
5) 9300 -Y
6) 9301 -Y

[snafup]

First: I want to thank you all for continuing to help in the manner that you are. Each and every data request has been helping, and you all are making a major impact... You really are:

---------

Test Channels 9300/9301 are back on the air... and there is no set turn off date/time. So enjoy them while they last...

---------

More data collecting:
(I reserve the right to change this later on today... and ask you to again report your results)

Key Information:
1) Box model and Sw version
2) 498 y/n
3) 480 y/n
4) 481 y/n
5) 9300 y/n
6) 9301 y/n

Please report for each and every MPEG-4 compatible equipment you have...

If you don't have the required equipment (5LNB, proper multiswitches, please don't vote).

1)HR20-700
2 498y
3) 480y
4) 481y
5)9300y
6) 9301y

[Mogo]

1) Box model and Sw version---HR20-100, 0x18a

2) 498 y/n-----------------------------------N <--been able to see all OK message in past but not now

3) 480 y/n-----------------------------------Y
4) 481 y/n-----------------------------------Y
5) 9300 y/n----------------------------------Y
6) 9301 y/n----------------------------------Y

[RichM]

1) HR20-100 0x18a
2) 498 NO - Didn't work until the first 9300 test, now it's back to not working
3) 480 yes - gray screen, confirmed msg at the bottom
4) 481 yes - gray screen, confirmed msg at the bottom
5) 9300 yes
6) 9301 yes

[syphix]

Minneapolis area:

Key Information:
1) HR20-700, 0x19d
2) 498 - NO: worked yesterday...okay...wait...yes..I SWEAR it wasn't coming in before, but I just tested on both tuners and it's coming in fine.
3) 480 - YES
4) 481 - YES
5) 9300 - YES
6) 9301 - YES

Can't comment about the quality of the video as I'm streaming via Slingbox on a 256k stream.

[CoachGibbs]

1) HR20-700 19e
2) 498 N- Just stopped
3) 480 Y
4) 481 Y
5) 9300 Y
6) 9301 Y

1) H20-600 0x2038
2) 498 N- Just stopped
3) 480 Y
4) 481 Y
5) 9300 Y
6) 9301 Y

[BGreen965]

2x HR20-700 with 0x19d;
No 498 Edit: Pause was able to bring the slide up once
Yes on everything else

1x h20-600 with NR
No 498
Yes on everything else

AS of 1555EDT I am getting 498 as well.

[jj4vr]

1. hr20-100 0x18a
2. 498 - no (worked before today.)
3. 480 - yes
4. 481 - yes
5. 9300 -yes
6. 9301 - yes

[MIAMI1683]

hr20-700 soft. 019e Yes to all
hr20-100 soft 18a (nat)
480 = y
481 = y
498 = n (pause makes it appear)
9300 = y
9301 =y

h20 soft. 018a yes to all

So I hope this helps

[Crypter]

1a) HR20-100 0x18a
1b) HR20-700 0x18a
2) 498 - Yes
3) 480 - Yes
4) 481 - Yes
5) 9300 - Yes
6) 9301 - Yes

All my YES answers apply to both tuners on both receivers.

[robertsjc]

1) HR20-700 0x18a
2) 498 y
3) 480 y
4) 481 y
5) 9300 y
6) 9301 y
Both tuners

Dallas, Texas

[atdauph]

I just called my wife at home and she was surprised to find the Dog Whisperer in HD. :D

Key Information:
1) HR20-100
2) 498 y
3) 480 y
4) 481 y
5) 9300 y
6) 9301 y

[doo4usc]

1) 2 Hr20-700 0X18a
2) no, on both
all others yes on both

[drmarq]

Key Information:
1) Box model and S/W version: HR20-100 & HR20-700; 0x18a on both
2) 498: Currently NO (was Yes yesterday) on both
3) 480: Y on both
4) 481: Y on both
5) 9300: Y on both
6) 9301: Y on both

Edit 1530 CDT: Just got back and 498 is working on both systems.

[lowgolfer]

Located in NW MN

HR20-700 o19e
y
y
y
y
y

[TheJERK]

1) Box model = HR100S, Sw version = 0x18a
2) 498 = N, Never did show or hear anything. *
3) 480 = Y
4) 481 = Y
5) 9300 = Y
6) 9301 = Y




- * Now working

[spidey]

1) Box model and Sw version--- 2 x HR20-700, 0x19d H20 2036 All on SWM1.0.4
2) 498 y/n-----------------------------------Y
3) 480 y/n-----------------------------------Y
4) 481 y/n-----------------------------------Y
5) 9300 y/n----------------------------------Y
6) 9301 y/n----------------------------------Y[

[EJB]

Houston, TX
1) Box model and Sw version---HR20-700, 0x19e
2) 498 y/n-----------------------------------N (black screen)
3) 480 y/n-----------------------------------Y
4) 481 y/n-----------------------------------Y
5) 9300 y/n----------------------------------Y
6) 9301 y/n----------------------------------Y


Thanks!
EJB

[TomMac]

1) 1 - Box model HR20-700, sw ver 019e
2)498 - n (black screen)
3)480 - y
4)481 - y
5)9300 - y
6)9301 - y
Dayton, OH DMA, Kettering, OH

Please note up until this time I had 498 for the first time. It came up this morning. Now it is gone.

[dkgator]

1) Box model and Sw version---HR20-700, 0x19e Slimline Dish Quad Shield coax.
2) 498 y/n-----------------------------------N (black screen)
3) 480 y/n-----------------------------------Y
4) 481 y/n-----------------------------------Y
5) 9300 y/n----------------------------------Y
6) 9301 y/n----------------------------------Y

498 Worked Yesterday with sound after the late 9300/9301 test now it does not. :confused:

I get everything else

[tlrowley]

From Tracy, CA (south of Sacramento)
1. HR20-700 0x19d (Zinwell 6x8 switch)
2. 498 - N (for both tuners - it used to work for both)
3. 480 - Y
4. 481 - Y
5. 9300 - Y
6. 9301 - Y

[Chris12]

Unit#1
1) HR20-700 0x19d
2) N (had been working previously...now gray screen)
3) Y
4) Y
5) Y
6) Y

UNIT#2
1) HR20-700 0x19a
2) N (had been working previously...now gray screen)
3) Y
4) Y
5) Y
6) Y

Unit#3
1) H20-600 0x2038
2) N (had been working previously...now black screen)
3) Y
4) Y
5) Y
6) Y

[karnac]

2-HR20-700 18a
1-HR20-100 18a
498-no (NEVER)
481-yes
480-yes
9300-yes
9301-yes

[snafup]

2) Now 498 is black everything else ok.

[llowrey]

1) HR20-100 0x18a
2) No (See Note)
3) Yes
4) Yes
5) Yes
6) Yes

For the first time, I get the black screen on 498. It had worked consistently since it debuted. I even tested it early today, before the 9300/1 channels came back.

Before 9300/1 came back today, everything worked perfectly, including the first test of 9300/1.

After this 2nd test of 9300/1, I am getting a black screen on 498 but everything else works perfectly.

[Michael D'Angelo]

1) Box model and Sw version-------3- HR20-700's (0x19e) connected to SWM8
2) 498 y/n-----------no on all (gray screen) was working before today.
3) 480 y/n-----------yes on all
4) 481 y/n-----------yes on all
5) 9300 y/n---------yes on all
6) 9301 y/n---------yes on all

1) Box model and Sw version-----------H21-200 (0x4020) connected to SWM8
2) 498 y/n----------no (black screen) was working before today.
3) 480 y/n------------yes
4) 481 y/n------------yes
5) 9300 y/n----------yes
6) 9301 y/n----------yes

1) Box model and Sw version-----------2- H20-600's (1- 0x2038 and 1- 0x2024) both connected to WB68 with BBC.
2) 498 y/n------------no on both (black screen) was working before today.
3) 480 y/n------------yes on both
4) 481 y/n------------yes on both
5) 9300 y/n----------yes on both
6) 9301 y/n----------yes on both


UPDATE: As of 4:20 p.m. ET 498 is now working again for me on all receiver's.

[amitgupta_email]

Detroit area:

hr20-700 soft. 019e
480 = y
481 = y
498 = y
9300 = y
9301 =y


Bring it on...............

[cagey45]

1. H-20-600 ver. 0x2024

2. 498 = NO, (was working before but not now)

3. 480 = YES

4. 481 = YES

5. 9300 = YES

6. 9301 = YES

Los Angeles area

[BamaDawg]

1) Box model and Sw version-HR20-700, 0x18a
2) 498 y/n-No
3) 480 y/n-Yes
4) 481 y/n-Yes
5) 9300 y/n-Yes
6) 9301 y/n-Yes

1) Box model and Sw version-H20-600, 0x2024
2) 498 y/n-No
3) 480 y/n-Yes
4) 481 y/n-Yes
5) 9300 y/n-Yes
6) 9301 y/n-Yes

Birmingham, AL

[j2fast]

1) Box model and Sw version---HR20-700, 0x19d
2) 498 y/n-----------------------------------N - Hasn't ever worked for me (black screen).
3) 480 y/n-----------------------------------Y
4) 481 y/n-----------------------------------Y
5) 9300 y/n----------------------------------Y
6) 9301 y/n----------------------------------Y

[RxMan1]

Two Hr20-700s wth 0x19a. Zinwell 4x8.

498=n
480=y
481=y
9300=y
9301=y

[Canis Lupus]

Boise, Idaho:

HR #1

1) HR20-700, 0x19e
2) 498 - Y
3) 480 -Y
4) 481 -Y
5) 9300 -Y
6) 9301 -Y

HR #2

1) HR20-700, 0x19e
2) 498 - N
3) 480 -Y
4) 481 -Y
5) 9300 -Y
6) 9301 -Y

[arkeng]

1) H20-600 (0x2034)
2) 498 N
3) 480 Y
4) 481 Y
5) 9300 Y
6) 9301 Y

1) HR20-700 (0x18a)
2) 498 N
3) 480 Y
4) 481 Y
5) 9300 Y
6) 9301 Y

[DMRI2006]

1) Box model and Sw version--- H20-100, 0X2036 (I have 2 boxes, identical setup)
2) 498 y/n-----------------------------------NO (worked before; went off just recently)
3) 480 y/n-----------------------------------YES
4) 481 y/n-----------------------------------YES
5) 9300 y/n----------------------------------YES
6) 9301 y/n----------------------------------YES

Everything looks terrific -- except the blank screen on 498. Looks like I'm not alone though...so I'm not worried about it.

GOOD TO GO ON BOTH MODELS (other than 498 just going out)

[Scooter22]

Seems like 498 went dead around the same time the announcement for 9300 and 9301 went back up. I had 498 on, pressed channel down to NASA, then channel up to Golf and then I tried pressing 498 and POOF! It went blank. Everything else works fine though.


Scooter

[lindappel]

1. HR 20-100 0x18a
2. 498 - Y (worked previously/Disappeared after 9300-9301 came online/Now back on both tuners)
3. 480 - Y
4. 481 - Y
5. 9300 -Y
6. 9301 -Y

[vurbano]

1) Box model and Sw version---HR20-100, 0x18a
2) 498 y/n-----------------------------------NO Never worked
3) 480 y/n-----------------------------------Y
4) 481 y/n-----------------------------------Y
5) 9300 y/n----------------------------------Y
6) 9301 y/n----------------------------------Y

What a relief.

[jtm]

HR20-700 Ox19d

498 - No (had it until today)
480 - Yes
481 - Yes
9300 - Yes
9301 - Yes

[Hdhead]

1) Hr20 x18a
2) 498 n
3) 480 y
4) 481 y
5) 9300 y
6) 9301 y

1) Hr20 x18a
2) 498 y 1 tuner, n 2nd tuner
3) 480 y
4) 481 y
5) 9300 y
6) 9301 y

1) (2) H2Os x2024
2) 498 y
3) 480 y
4) 481 y
5) 9300 y
6) 9301 y

[slumkid]

1) HR20-100 0x18a
2) 498 n (always worked until now)
3) 480 y
4) 481 y
5) 9300 y
6) 9301 y

Pompano Beach FL

[gslater]

Key Information:
1) Box model and Sw version
H20-100 x2036 (2 of same following applies to both)

2) 498 No (First time it hasn't worked) Yes (Now working. See edit below)
3) 480 Yes
4) 481 Yes
5) 9300 Yes
6) 9301 Yes

Would also like to report that the video pixellation and freezing I experienced the other night are gone. Picture looks great. Signal strengths on odd TP's have been fine. Signal strength on Even Tp's has been lower. Ranged from 67 - 80 during last test (Evens). Now ranges from 80 - 95 on Evens. Odd Tp's remain 90 - 95.

Edit: Just changed 498 from Yes to No. Guess I shouldn't have assumed anything. It has always worked before but all I get now is a Black Screen.

Edit: 498 is now working again. Had to wait 10 - 15 seconds for it to light up though.

[Max_Pauer]

1. HR20-100 0x18a
2. 498 = no (have yet to ever see this channel other than a black screen)
3. 480 = yes
4. 481 = yes
5. 9300 = yes
6. 9301 = yes

[jlancaster]

1) Box model and Sw version---HR20-700, 0x19e
2) 498 -Y
3) 480 -Y
4) 481 -Y
5) 9300 -Y
6) 9301 -Y

SWM5

[Sah]

Receiver #1:
1) HR20-700 0x18a
2) 498=N (was coming in fine prior to 9300/9301 coming back on online)
3) 480=Y
4) 481=Y
5) 9300=Y
6) 9301=Y

Receiver #2:
1) HR20-700 0x18a
2) 498=N (was coming in fine prior to 9300/9301 coming back on online)
3) 480=Y
4) 481=Y
5) 9300=Y
6) 9301=Y

[malanick]

1) Box model and Sw version---HR20-700, 0x19e
2) 498 y/n-----------------------------------Y
3) 480 y/n-----------------------------------Y
4) 481 y/n-----------------------------------Y
5) 9300 y/n----------------------------------Y
6) 9301 y/n----------------------------------Y
:)

[BudShark]

1) HR20-100 0x18a
2) 498 n (always worked before)
3) 480 y
4) 481 y
5) 9300 y
6) 9301 y

Chris

[psternklar]

Hr20-100 018a
All yes

[ICM2000]

1) Box model and Sw version---HR20-700, 0x19d
2) 498 y/n----------------------------------- Blank worked earlier
3) 480 y/n-----------------------------------Y
4) 481 y/n-----------------------------------Y
5) 9300 y/n----------------------------------Y
6) 9301 y/n---------------------------------- Y

[mark2061]

3 - h20-100 - SW version 2036

480----------y
481----------y
498----------n - Y- now working
9300---------y
9301---------y

Was receiving 498 until these test channels today.

498 now working!!

[forecheck]

1) HR20-700, 0x19a, zinwell 6x8 is in use
2) 498 No (worked before, now black screen)
3) 480 Yes
4) 481 Yes
5) 9300 Yes
6) 9301 Yes

[buckeyeb]

1) Box model and Sw version-HR20-700, 0x18a
2) 498 y/n-No - I had picture and sound earlier today
3) 480 y/n-Yes
4) 481 y/n-Yes
5) 9300 y/n-Yes
6) 9301 y/n-Yes

[gpg]

HR20 0x19E
498 n
480 y
481 y
9300 y
9301 y

498 is just a gray screen with no slide or audio. It was working earlier today BEFORE a DirecTV service call to peak my AT-9 dish. Now my signal strengths on 103b are higher, but I no longer receive the 498 slide and audio!!

UPDATE at 3:30 EDT: all channels including 498 are working

[John Buckingham]

From Aztec, NM
Key Information:
1) HR20-700, 0x18a, H20-600 0x2024 (same results on both)
2) 498 n, first time it hasn't worked for me, always worked before
3) 480 y
4) 481 y
5) 9300 y
6) 9301 y
+1

[DaveEv]

First: I want to thank you all for continuing to help in the manner that you are. Each and every data request has been helping, and you all are making a major impact... You really are:




HR20-700 at 0x18a
498 no sound, no slide
480 Y
481 Y
9300 Y
9301 Y

[djzack67]

1)---HR20-700, 0x18e
2) 498 y/n-----------------------------------Y
3) 480 y/n-----------------------------------Y
4) 481 y/n-----------------------------------Y
5) 9300 y/n----------------------------------Y
6) 9301 y/n----------------------------------Y

[dingJam]

1) Box model and Sw version -- HR20-100, 0x18a
2) 498 y/n -- y (Picture but no sound - not sure if there should be)
3) 480 y/n -- y
4) 481 y/n -- y
5) 9300 y/n -- y
6) 9301 y/n -- y

5LNB slimline, no multiswitch. Both before and today, 498 took a long time to begin showing the first time it was tuned in - ~2-3 minutes at least. Once it shows up though, it's there to stay and channel change to it take no longer than normal.

This was as of about 1:05 pm - not able to check again after that.

[rgainey412]

1) H20-100 2021
2) Y
3) Y
4) Y
5) Y
6) Y

[apk8]

Similar to most results HR20-100 with 18a
498 Not working now, but it did up until this afternoon
480 yes
481 yes
9300 yes
9301 yes

[DMRI2006]

498 is just a gray screen with no slide or audio. It was working earlier today BEFORE a DirecTV service call to peak my AT-9 dish. Now my signal strengths on 103b are higher, but I no longer receive the 498 slide and audio!!

I wouldn't worry about it. 498 went off just recently, around the same time 9300 and 9301 went up. Looks like most are experiencing the same thing.

[F1 Fan]

Thanks Earl and D* for getting them back for us.
1) HR20-100s NR 18a
2) 498 - no never - tried everything - still not on after getting 9300/1
3) 480 - yes
4) 481 - yes
5) 9300 - yes - NGC HD 720p pillarbox - no audio or visual loss - great pq and sound!
6) 9301 - yes - DSC HD 1080i full screen - no audio or visual loss - great pq and sound!

As a side note: I have never got 498 - tried every trick on here and more. I purposely did nothing to my box to see if 9300 came up by itself if D* bought them back - and it did. So my theory is as long as all hardware/install is good then when they flip the switch most people will get them without doing anything.

[ahatten]

1) Box model and Sw version---HR20-700, 0x18a
2) 498 - Y (first time today)
3) 480 -Y
4) 481 -Y
5) 9300 -Y
6) 9301 -Y


Yippee!

[Strejcek]

1) Box model and Sw version---HR20-700, 0x19e
2) 498 - no, black screen, no audio, no messages
3) 480 - yes
4) 481 - yes
5) 9300 - yes
6) 9301 - yes

I was able to get 498 working this morning by running sat signal test; however, now that does not get it working now.

[ProfLonghair]

Key Information:
1) Box model and Sw version HR20-700 (19e)
2) 498 y/n N (771, was black screen first)
3) 480 y/n Y
4) 481 y/n Y
5) 9300 y/n Y
6) 9301 y/n Y

490 Y
491 Y
494 N (771)


BUT!!!!!!!!!!!
all my 70s show "771"

These are the first failures I've had on the test channels

[geekmom]

Key Information:
1) HR20-700 - 0x19E
2) 498 no, black screen--has been up until now
3) 480 yes
4) 481 yes
5) 9300 yes
6) 9301 yes

Now at 1:20 MDT
1) HR20-700 - 0x19E
2) 498 YES
3) 480 yes
4) 481 yes
5) 9300 yes
6) 9301 yes

[dbmaven]

Hudson Valley, New York area (zip 10930)

Key Information:
1) HR20-100 Nat'l Release 0x18A
2) 498 N - was working earlier today, and has always worked before - not now
3) 480 Y
4) 481 Y
5) 9300 Y
6) 9301 Y

[Scorch]

1) HR20-700, 0x18a
2) 498 - NO - worked before, not working now
3) 480 - Yes
4) 481 - Yes
5) 9300 - Yes - National Geographic
6) 9301 - Yes - Discovery Channel

[EdM]

1)HR20-100s 0x18a
2) 498 n
3) 480 y
4) 481 y
5) 9300 y
6) 9301 y

[DufferEA]

1)---HR20-700, 0x18e --- H20-600 0x2038
2) 498 y/n---------------------------------N (worked uptill 9300, 9301 came on)
3) 480 y/n---------------------------------Y
4) 481 y/n---------------------------------Y
5) 9300 y/n--------------------------------Y
6) 9301 y/n--------------------------------Y

[forecheck]

1) HR20-700, 0x19a, zinwell 6x8 is in use
2) 498 No (worked before, now black screen)
3) 480 Yes
4) 481 Yes
5) 9300 Yes
6) 9301 Yes

And same results with my 2nd receiver, an H20-100, with the national release, 0x2021

[grizbear]

1) I have 2 HR20-100’s 0x18a zinwell WB616
2) 498 blank screen on both, b4 worked sometimes on 1 unit only
3) 481 yes both
4) 481 yes both
5) 9300 yes both
6) 9301 yes both

9300 & 1 just popped right up! Thought my HR20-100’s were defective!

[satex]

1. H20-600 0x2038
2. 498 - no (worked this morning.)
3. 480 - yes
4. 481 - yes
5. 9300 -yes
6. 9301 - yes

[dcoale]

Key Information:
1) HR20-700 #1, 0x19e
2) 498 --------------- y
3) 480 --------------- y
4) 481 --------------- y
5) 9300 -------------- y
6) 9301 -------------- y

HR20-700 #2 0x19e
2) 498 --------------- y
3) 480 --------------- y
4) 481 --------------- y
5) 9300 -------------- y
6) 9301 -------------- y

[Sirshagg]

Test Channels 9300/9301 are back on the air... and there is no set turn off date/time. So enjoy them while they last...



This is cool, but I really hope they get turned off Wed morning :)

[treecastle]

1) HR20-700 0x18a
2) N
3) Y
4) Y
5) Y
6) Y


1) H20-100 0x100c
2) N
3) Y
4) Y
5) Y
6) Y

1) H20-100 0x100c
2) N
3) Y
4) Y
5) Y
6) Y

[haggis444]

Box #1
1) HR20-700, 0x19e
2) 498 no for both tuners (didn't work yesterday either)--Gray screen
3) 480 yes
4) 481 yes
5) 9300 yes
6) 9301 yes

Box #2
1) HR20-700, 0x19e
2) 498 no for both tuners (first time it hasn't worked on this box)--Gray screen
3) 480 yes
4) 481 yes
5) 9300 yes
6) 9301 yes

[ohills]

2- HR20-700 19e
for both:
498 n
480 y
481 y
9300 y
9301 y

[rbean]

2 hr20-700
at9 10ft to block 50-60 ft to receivers
no switch
grey screen 498, have had from the start
480 & 481 ok
didn't get to try 9300 &9301 first time
getting 9300 & 9301 today
national release both HR 20's

[iamjemhadar]

Family room
1) HR20-700 0x18a
2) 498 = n
3) 480 = y
4) 481 = y
5) 9300 = y
6) 9301 = y

Living room
1) HR20-700 0x19a
2) 498 = n
3) 480 = y
4) 481 = y
5) 9300 = y
6) 9301 = y

[killi]

hr20-700 0x19e

498 - NO (Worked earlier but black screen now)
480 - YES
481 - YES
9300 - YES
9301 - YES

[timareagan]

1. HR20-700 with 0x18a
2. 498 = N, never have, grey screen, tried all the mention fixes, none worked
3. 480 = Y
4. 481 = Y
5. 9300 = Y
6. 9301 = Y

[Old Guy]

HR20-700 and -100. Both 0x18a

Both
480- Yes
481- Yes
498- No (had until 9300, 9301 lit up)
9300- Yes (720p)
9301- Yes (1080i)

Halfway between Portland and Seattle. SEA DMA

[MoInSTL]

1) HR20-700, 0x18a
2) 498 -N now, Y before
3) 480 -Y
4) 481 -Y
5) 9300 -Y
6) 9301 -Y

No multi-switch

[matthpd195]

HR20-100 0x18a
2) 498 --------------- n (never worked)
3) 480 --------------- y
4) 481 --------------- y
5) 9300 -------------- y
6) 9301 -------------- y

Slimline dish

WB68 Multiswitch

[jash]

earl,

i have all the right equimpment but they don't work since i'm an mdu customer. do you have any idea when they'll deliver mfh2 or 3 so we can all start enjoying the new content?

thank you.

[OlderNDirt]

1) I have 2 HR20-700’s, 0x18a, multi switch, but on roof and cannot access (assume correct since installed in July)
2) 498 blank screen on both now, b4 worked sometimes on 1 unit only
3) 481 yes both
4) 481 yes both
5) 9300 yes both
6) 9301 yes both

[mhayes70]

1) Box model and Sw version HR20-100 0x18a
2) 498 y/n No, Black screen no picture or sound
3) 480 y/n Yes
4) 481 y/n Yes
5) 9300 y/n Yes
6) 9301 y/n Yes

1) Box model and Sw version HR20-700 0x19a
2) 498 y/n No, Black screen, no picture or sound
3) 480 y/n Yes
4) 481 y/n Yes
5) 9300 y/n Yes
6) 9301 y/n Yes

1) Box model and Sw version H20-600 0x2024
2) 498 y/n No, Black screen, no picture or sound
3) 480 y/n Yes
4) 481 y/n Yes
5) 9300 y/n Yes
6) 9301 y/n Yes

[dan8379]

Seems practically everyone is getting both of these channels--is anyone who was previously getting the "searching for signal" message on one of their tuners now getting both channels on both tuners? (I'm at work and can't check myself)

[smpjmp]

Key Information:
1) HR20-700, 0x19e (x2) (same results on both)
2) 498 Y, It is on now
3) 480 y
4) 481 y
5) 9300 y
6) 9301 y

[boulder_gp]

Key Information:
1) HR20-700 with 0x18a
2) 498 - No (never)
3) 480 - Yes
4) 481 - Yes
5) 9300 - Yes
6) 9301 - Yes

[waynebtx]

1) Box model and Sw version---HR20-700, 0x19e
2) 498 y/n-----------------------------------N Worked this morning now only a gray screen. This is on both turners
3) 480 y/n-----------------------------------Y
4) 481 y/n-----------------------------------Y
5) 9300 y/n----------------------------------Y
6) 9301 y/n----------------------------------Y
Corpus DMA 129

[HD30TV]

Key Information:
1) Box model and Sw version
2) 498 y/n
3) 480 y/n
4) 481 y/n
5) 9300 y/n
6) 9301 y/n

1) HR20-700 (0x18a)
2) Yes, but just a blank gray screen now again (even after tuning in 9300/9301 [aka, what worked last time])
3) Yes
4) Yes
5) Yes
6) Yes

[bbabu]

Receiver #1:
1) HR20-700 0x18a
2) 498=N (was coming in fine prior to 9300/9301 coming back on online)
3) 480=Y
4) 481=Y
5) 9300=Y
6) 9301=Y

Receiver #2:
1) H20-100 0x2021
2) 498=N (was coming in fine prior to 9300/9301 coming back on online)
3) 480=Y
4) 481=Y
5) 9300=Y
6) 9301=Y

[ffcv22id]

1) HR20-700, 0x18a
2) 498 no for both tuners (worked prior to Sunday and briefly today before 2)
3) 480 yes
4) 481 yes
5) 9300 yes
6) 9301 yes

[da_nc]

Near Charlotte, NC

HR20-700, 0x18a
498 ......... NO ... Just a 1080i Black screen, No sound. Was ok earlier today.
480 Yes
481 Yes
9300 Yes, 4:3 picture at 720p signal DD5.1 sound (NGC)
9301 Yes 16:9 pictire at 1080i with DD 5.1 sound (Discovery Ch.)

[lowe41]

1. H20-600 0x2024
2. 498 - no (Says B-band converter channel, but just get black screen) worked earlier today
3. 480 - yes
4. 481 - yes
5. 9300 -yes
6. 9301 - yes

[rsteinfe]

1) HR20-100 0x18a
2) 498 No (has always worked through this AM, now shows black screen, no audio)
3) 480 Yes
4) 481 Yes
5) 9300 Yes
6) 9301 Yes

[jceman]

H20-100 - 2036

498 NO (first time)
480 Yes
481 Yes
9300 Yes
9301 Yes

HR20-700 - 019e

498 No (both tuners - First time)
480 Yes (both tuners)
481 Yes (both tuners)
9300 Yes (both tuners)
9301 Yes (both tuners)

[malaern]

1) Recvr. 1---HR20-100, 0x18a
2) 498 -N (earlier today Y on both tuners)
3) 480 -Y
4) 481 -Y
5) 9300 -Y
6) 9301 -Y

1) Recvr. 2---HR20-100, 0x18a
2) 498 -N (earlier today Y on 1 tuner, N on 2nd tuner)
3) 480 -Y
4) 481 -Y
5) 9300 -Y
6) 9301 -Y

[kd7eai]

1) H 20-600, 2038
2) 498 -N now, always worked before
3) 480 -Y
4) 481 -Y
5) 9300 -Y
6) 9301 -Y

First time poster, been lurking a few weeks and have really enjoyed all the info and rumors. It's going to be very exciting to get all of the new channels in HD!

[jhutt75]

1) Box model and Sw version HR20-100 0x18a
2) 498 -Correction - No, had it yesterday but not today.
3) 480 -Yes
4) 481 -Yes
5) 9300 -Yes
6) 9301 -Yes

[John in Georgia]

1) Box model and Sw version---HR20-700, 0x19e
2) 498 y/n-----------------------------------Y
3) 480 y/n-----------------------------------Y
4) 481 y/n-----------------------------------Y
5) 9300 y/n----------------------------------Y
6) 9301 y/n----------------------------------Y

(Thanks to HarleyD for the formatting I stole.)

[davring]

Both HR20-700's: YES to all
Current nat. release


Double checked 2:57 PM, 498 not working either receiver

[shamus46]

First: I want to thank you all for continuing to help in the manner that you are. Each and every data request has been helping, and you all are making a major impact... You really are:

---------

Test Channels 9300/9301 are back on the air... and there is no set turn off date/time. So enjoy them while they last...

---------

More data collecting:
(I reserve the right to change this later on today... and ask you to again report your results)

Key Information:
1) Box model and Sw version
2) 498 y/n
3) 480 y/n
4) 481 y/n
5) 9300 y/n
6) 9301 y/n

Please report for each and every MPEG-4 compatible equipment you have...

If you don't have the required equipment (5LNB, proper multiswitches, please don't vote).

From Chemung, NY 14825

Key Information:
1) HR20-700, 0x19E
2) 498 no for both tuners
3) 480 yes
4) 481 yes
5) 9300 yes
6) 9301 yes

Thanks Earl

[sawCME]

H20-600 0x2038
498=N
480=Y
481=Y
9300=Y
9301=Y

What's interesting is that I always got 498 before today.

[RAD]

H20-600, x2038, two HR20-700's x019e, H21-200 x4020

All boxes same test result:

489 - Fail

480/481/9300/9301 - Pass

I did notice an audio sync problem on 9300 on one of the HR20's check the H21, it didn't have it, changed to 9301 and then back to 9300 and no audio sync problem.

[SnowManson]

1) Box model and Sw version---HR20-100, 0x18ay
2) 498 y/n-----------------------------------Y - This had been working, then it wasn't this morning when 9300/9301 turned on but as of 3:24pm EDT it's working again!

3) 480 y/n-----------------------------------Y
4) 481 y/n-----------------------------------Y
5) 9300 y/n----------------------------------Y
6) 9301 y/n----------------------------------Y

[Cobra]

HR700 ce19
498- no worked previously
480-y
481-y
1300-y? says nik not available though
1301-y? same as above

[bobnewhouse]

1) HR20 - 700 19e
2) 498 - no - first time it hasn't worked - yes - it came back about an hour after the original post
3) 480 - yes
4) 481 - yes
5) 9300 - yes
6) 9301 - yes

Haslet, TX

[HD30TV]

Did anyone else get a 1080i "Technical Diffficulties" slide on 9300 for a bit?

Tuned to it it to see that, and about 20-30 seconds later, it went back to NGC's programming, 4:3 "Pet Whisperer".

[Bud4OU]

I have two and both are:

1) Box model and Sw version---HR20-700, 0x18a
2) 498 y/n-----------------------------------Y
3) 480 y/n-----------------------------------Y
4) 481 y/n-----------------------------------Y
5) 9300 y/n----------------------------------Y
6) 9301 y/n----------------------------------Y

[ctwilliams]

Key Information:
1) Box model and Sw version HR20-700, Latest CE
2) 498 y/n Was working earlier today, not now
3) 480 y/n YES
4) 481 y/n YES
5) 9300 y/n YES
6) 9301 y/n YES

[jpercia]

1) Box model and Sw version---HR20-700, 0x18a
2) 498 y/n-----------------------------------Y
3) 480 y/n-----------------------------------Y
4) 481 y/n-----------------------------------Y
5) 9300 y/n----------------------------------Y
6) 9301 y/n----------------------------------Y

[cujo46]

From Minneapolis/St. Paul

HR20-100 0x18a
Ch 498 - Blank Screen (Now working as of 2:28 PM CDT)
Ch 480 - Y
Ch 481 - Y
Ch 9300 - Y
Ch 9301 - Y

H20-600 0x2034
Ch 498 - Blank Screen (Now working as of 2:30 PM CDT)
Ch 480 - Y
Ch 481 - Y
Ch 9300 - Y
Ch 9301 - Y

[awalt]

Key Information:
1) HR20-700, 0x18a
2) 498 yes
3) 480 yes
4) 481 yes
5) 9300 yes
6) 9301 yes

[GeorgeLV]

1) HR20-700, 0x019e
2) 498 Y (now working, blank screen initially when 9300/9301 came back, worked previously)
3) 480 Y
4) 481 Y
5) 9300 Y
6) 9301 Y

1) H20-600, 0x2024
2) 498 Y (now working, blank screen initially when 9300/9301 came back, worked previously)
3) 480 Y
4) 481 Y
5) 9300 Y
6) 9301 Y

[shedberg]

Key Information:
1) Box model and Sw version: HR20-700
2) 498 y/n: Sometimes (no longer since 9300/9301 went up again)
3) 480 y/n: Always
4) 481 y/n: Always
5) 9300 y/n: Yes, 9/24/07
6) 9301 y/n: Yes, 9/24/07


1) Box model and Sw version: HR20-100
2) 498 y/n: Installed today - did not work but suspect 9300/9301 went up prior
3) 480 y/n: Yes
4) 481 y/n: Yes
5) 9300 y/n: Yes, 9/24/07
6) 9301 y/n: Yes, 9/24/07

1) Box model and Sw version: H20-100
2) 498 y/n: Sometimes (no longer since 9300/9301 went up again)
3) 480 y/n: Always
4) 481 y/n: Always
5) 9300 y/n: Yes, 9/24/07
6) 9301 y/n: Yes, 9/24/07

[bjohn34]

1) HR20-100 0x18a
2) 498 n (first time ever, always got it before)
3) 480 y
4) 481 y
5) 9300 y
6) 9301 y

[Azdeadwood]

Alpine, Texas

1) HR20-700, 0x18a
2) 498 N NOTE: I was getting 498 on this TV before the 9300 were added.
3) 480 Y
4) 481 Y
5) 9300 Y
6) 9301 Y


1) HR20-700, 0x18a
2) 498 N Note: Never got 498
3) 480 Y
4) 481 Y
5) 9300 Y
6) 9301 Y


1) 2 H20-600, 0x2024
2) 498 Y
3) 480 Y
4) 481 Y
5) 9300 Y
6) 9301 Y

[rap0819]

1. H20-600 0x2024
2. 498 No (had it earlier today)
3. 480 Yes
4. 481 Yes
5. 9300 Yes
6. 9301 Yes

[sack9]

3 hr20-700 1,19d 2,19a
1 hr20-100 18a
498=N Blank Screen
480=Y
481=Y
9300=Y
9301=Y

[Bob Coxner]

Did anyone else get a 1080i "Technical Diffficulties" slide on 9300 for a bit?

Tuned to it it to see that, and about 20-30 seconds later, it went back to NGC's programming, 4:3 "Pet Whisperer".

I saw the same. It went from 720 before the slide to 1080 after.

[CTJon]

Seems to me that everyone seems to be getting the REAL HD on 9300/9301 which seems to be great news. The real stuff works better than the test. SO YOU KNOW WHAT THAT MEANS - BRING IT ON!

[shedberg]

Sorry, on National release for all boxes.

Key Information:
1) Box model and Sw version: HR20-700
2) 498 y/n: Sometimes (no longer since 9300/9301 went up again)
3) 480 y/n: Always
4) 481 y/n: Always
5) 9300 y/n: Yes, 9/24/07
6) 9301 y/n: Yes, 9/24/07


1) Box model and Sw version: HR20-100
2) 498 y/n: Installed today - did not work but suspect 9300/9301 went up prior
3) 480 y/n: Yes
4) 481 y/n: Yes
5) 9300 y/n: Yes, 9/24/07
6) 9301 y/n: Yes, 9/24/07

1) Box model and Sw version: H20-100
2) 498 y/n: Sometimes (no longer since 9300/9301 went up again)
3) 480 y/n: Always
4) 481 y/n: Always
5) 9300 y/n: Yes, 9/24/07
6) 9301 y/n: Yes, 9/24/07

[Richi]

hr20 0x18a, h20 0x2024
498 n
480 y
481 y
9300 y
9301 y

[fade2black]

South Jersey next to Philly...

1) HR20-100 0x18a and H20-600 2038...

2) 498 NO!! Was working this morning before 10am

3) 480 Yes

4) 481 Yes

5) 9300 Yes

6) 9301 Yes

Same results on both receivers

[Talonn]

HR20-100S
0x18a
AU9 slimline dish
SW68
498- NO
480- YES
481- YES
9300- NO
9301- NO (I do have audio on this channel)

Note:
I do have 72.5 bird for SD locals and it's cable is connected th the WB68

I have noticed that if i step + i will have audio on 9301, now if step channel forward one more time and then reverse and - i lose audio on 9301 but now I have audio on 9300. Never any picture

[MiamiPhins]

1) HR20-100 OX18A HR20-700 OX19E
2) n on both
3) y on both
4) y on both
5) y on both
6) y on both recievers
However 9300 and 9301 showed flaky results. My HR20-100 was on 9301 went upstairs and tuned the 700 to 9301 and got searching for satellite. Went back downstairs and tuned the 100 to 9300. Went back upstairs changed the 700 to 9301 and started working. Went down to the 100 again changed it to 9301 and both are working at the same time.
I'm spent.

[htgguy]

West Central MN

HR20-700 0x18a
498=N (worked this morning)
480=Y
481=Y
9300=721-Channel not purchased
9301=Y

[Mike Bertelson]

1) HR20-700 0x18a
2) 498 Y
3) 480 Y
4) 481 Y
5) 9300 Y
6) 9301 Y

Checked on both tuners. I tried to record the Mythbusters and I can't. Probably not allowed yet.

Mike

[BruceS]

1. HR20-700, 19d, no multi-switch
2. 498 - No. although got audio for a second on one tuner. Previously could receive on 1 tuner only.
3. 480 - Y
4. 481 - Y
5. 9300 - Y
6. 9301 - Y

I don't know whether this makes any difference, but I just checked my online statement and it no longer shows any of the extra additions and subtractions made for the previous test.

[Vader14]

1) Box model and Sw version: HR20-700 19E
2) 498 N -(Worked this morning, now black screen but no searching for signal message)
3) 480 Y
4) 481 Y
5) 9300 Y
6) 9301 Y

[ammar249]

Washington DC DMA

1) HR20-700, 0x18a
2) 498 No (worked yesterday night, currently all black but no searching for signal message)
3) 480 yes
4) 481 yes
5) 9300 yes
6) 9301 yes

[stblake10]

Box model (HR20) Sw version 0x19D
498Y
480 Y
481 Y
9300Y
9301 Y

[VeniceDre]

Office (Primary)

1) HR20-700 w/ 0x19e software
2) 498 Yes
3) 480 Yes
4) 481 Yes
5) 9300 Yes
6) 9301 Yes

Living Room

1) HR20-700 w/ 0x19e software
2) 498 Yes
3) 480 Yes
4) 481 Yes
5) 9300 Yes
6) 9301 Yes

Master Bedroom

1) HR20-700 w/ 0x19e software
2) 498 Yes
3) 480 Yes
4) 481 Yes
5) 9300 Yes
6) 9301 Yes

[kramerboy]

Cleveland, OH........

1) HR20-100s, 0x18a, zinwell 6x8
2) 498 Yes
3) 480 Yes
4) 481 Yes
5) 9300 Yes
6) 9301 Yes

[Quetzalcoatl]

1 HR20-100 0X18a H20-600 0X2024
2 No has worked up to this point but now it does not.
3 yes
4 yes
5 yes
6 yes

I have the same results for both units.

498 is now working for me again

[01ragtop]

Key Information:
1) HR20-700, 0x18a
2) 498 no for both tuners (first time it hasn't worked for me, always worked before)
3) 480 yes
4) 481 yes
5) 9300 yes
6) 9301 yes

[HBKDinobot]

1) HR20-700 w/ 0x19e
2) 498 = N
3) 480 = Y
4) 481 = Y
5) 9300 = Y
6) 9301 = Y

[johnnytex]

From Ennis, TX (south of Dallas)

1)HR20-100 0x18a
2)498=N Black screen Worked this morning
3)480=Y
4)451=Y
5)9300=Y
6)9301=Y

[virendra7]

hr20-700 ox18a w/bbcs no ota/switches.. 30ft to block 20ft to hr20
498=no
480=no
481=no
9300=no
9301=no ALL SEARCHING SAT(1or2)

i had 90+ readings on all 16tps on 103b signal strength meters around sept 12(yet zeroes on the transponder page)
all zeroes since then .reboots,resets,bbcs moves all in vain.
101/119/110= 95+
99b/103a/103b=0's

[lwilli201]

1) 2 HR20-700 and x19e (1 on SWS5, 1 on WB68)
2) 498 y
3) 480 y
4) 481 y
5) 9300 y
6) 9301 y

1) HR20-700 and x19a (on SWS5)
2) 498 y
3) 480 y
4) 481 y
5) 9300 y
6) 9301 y

1) H20-100 and x2036 (on WB68)
2) 498 y
3) 480 y
4) 481 y
5) 9300 y
6) 9301 y

I have all ways gotten possitive results on all receivers since 498 and 499 launched.

Edit: Channel 498 can on after first post. Corrected above.

[LDLemu4U]

1) 2 HR20-700s SW 0x18a
2) 498 No, on BOTH
3) 480 yes
4) 481 yes
5) 9300 yes
6) 9301 yes

This is very odd....I did not download the CE (0x19?) as I have been getting everything (498, 480, 481, 9300, 9301) until now.

[Skins Fan]

For the first time iever, I am now getting any the test channels, I now get 9300 9301 480 481 but I get a black screen for 489. Haven't done anything since Friday / re-alignment, checked cables & etc.

[dnewby]

1) hr20-700 (0x19E)
2) 498 No, black screen now
3) 480 Yes
4) 481 Yes
5) 9300 Yes
6) 9301 Yes

[Rpbertxyz]

1) H20-600 2038
2) 498 y
3) 480 y
4) 481 y
5) 9300 y
6) 9301 -Y

And

1) HR20-700, 0x19d
2) 498 -y
3) 480 -Y
4) 481 -Y
5) 9300 -Y
6) 9301 -Y

[drded]

Tucson, AZ

1) Box model and Sw version---HR20-700, 0x19e
2) 498 y/n-----------------------------------Y
3) 480 y/n-----------------------------------Y
4) 481 y/n-----------------------------------Y
5) 9300 y/n----------------------------------Y
6) 9301 y/n----------------------------------Y

Dave

[johnb1963]

First: I want to thank you all for continuing to help in the manner that you are. Each and every data request has been helping, and you all are making a major impact... You really are:

---------

Test Channels 9300/9301 are back on the air... and there is no set turn off date/time. So enjoy them while they last...

---------

More data collecting:
(I reserve the right to change this later on today... and ask you to again report your results)

Key Information:
1) Box model and Sw version
2) 498 y/n
3) 480 y/n
4) 481 y/n
5) 9300 y/n
6) 9301 y/n

Please report for each and every MPEG-4 compatible equipment you have...

If you don't have the required equipment (5LNB, proper multiswitches, please don't vote).

1) H20-600 0x2024
2)498 Y
3) 480 Y
4) 481 Y
5) 9300 y
6) 9301 Y

[markrubi]

Key Information:
1) HR20-700 Ox19e
2) 498 y/n N (Black screen today) - Last night yes
3) 480 y/n Y
4) 481 y/n Y
5) 9300 y/n Y
6) 9301 y/n Y



Key Information:
1) HR20-700 0x18a
2) 498 y/n N (Black screen today) - yesterday yes
3) 480 y/n Y
4) 481 y/n Y
5) 9300 y/n Y
6) 9301 y/n Y


All direct lines from dish to dvr's

[Juggernaut]

HR20-700, 0x18a
498: no video and no audio (never had it work)
480: y
481: y
9300: y
9301: y

[ChrisQ]

1)H20-100
2)498 searching for signal, first time it hasn't worked
3)480- searching for signal, first time it hasn't worked
4)481- yes
5)9300- yes
6)9301- yes

[cnmsales]

1) Box model and Sw version---HR20-700, 0x19e
2) 498 y/n-----------------------------------Y
3) 480 y/n-----------------------------------Y
4) 481 y/n-----------------------------------Y
5) 9300 y/n----------------------------------Y
6) 9301 y/n----------------------------------Y


Looks like 498 is now working for me. Just an hour ago it was not. First time it had not worked since the test started.

[shotdisc98]

1) HR20-700 version 19e
2) 498 Y
3) 480 Y
4) 481 Y
5) 9300 Y
6) 9301 Y

Slimline dish, 2 direct coax runs to receiver from dish, BBCs on rear of receiver, signal in between 70-79 on 103b on both tuners.

[BlueSnake]

2 HR20 700's 0x19E on both

480 Y
481 Y
498 N Black Screen No Sound (Had picture & sound a little over an hour ago)
9300 Y
9301 Y

Same on both boxes

UPDATE 3:20pm 498 is now working audio & video

[Bigguy]

1) hr20-700 and 0x18a version
2) 498 n (worked before)
3) 480 y
4) 481 y
5) 9300 y
6) 9301 y

[bohlke]

1) HR20-700
2) 498 No - black screen but at 1080i now (before was 720p)
3) 480 yes
4) 481 yes
5) 9300 yes
6) 9301 yes

[jakenasty]

sf bay area

1) HR20-700 0x18a
2) 498 n (earlier yes at 9am today)
3) 480 y
4) 481 y
5) 9300 y
6) 9301 y

[GP_23]

Montrose, CO

HR20-100
All channels, but 498 work, 498 worked earlier 9:00 am est.

[fkubick]

Model & SW - H20-100 0X2021
498 y
480 Y
481 Y
9300 Y
9301 Y

Model & SW - (2) HR20-700 0X18A
498 y
480 Y
481 Y
9300 Y
9300 Y

Before today I got 499 on H20 and HR20's. When 498 came on I got 498 on the H20 but neither of the HR20's. I got 480 and 481 on both the H20 and the HR20's.

I missed the 9300/9301 test the other night but today I'm getting both clear as a bell including DD.

[oldfantom]

1) (a) 1 qty H20 0x2024 (b) 2 qty HR20-700 0x18A
2) 498 (a) Black (b) grey
3) 480 y
4) 481 y
5) 9300 y
6) 9301 y

[Jarda]

1) HR20-100, 0x18a
2) 498 no, Lost it today
3) 480 bbc confirmed
4) 481 bbc confirmed
5) 9300 yes
6) 9301 yes

1) HR20-700, 0x18a
2) 498 no, Lost it today
3) 480 bbc confirmed
4) 481 bbc confirmed
5) 9300 yes
6) 9301 yes

[WaltL]

1) Box model and Sw version HR20-700 2ea 19e, HR20-100 18a
2) 498 y/n.....n, was working on all earlier today.
3) 480 y/n.....y
4) 481 y/n.....y
5) 9300 y/n...y
6) 9301 y/n...y

[cmziggy]

1) Box model and Sw version---HR20-700, 0x19d
2) 498 y/n-----------------------------------Blank both tuners
3) 480 y/n-----------------------------------Y
4) 481 y/n-----------------------------------Y
5) 9300 y/n----------------------------------Y
6) 9301 y/n----------------------------------Y

[JDB30]

1) Box model and Sw version: HR20-700 0x18a
2) 498 NO (only get a black screen---it was working over the weekend but not today)
3) 480 YES
4) 481 YES
5) 9300 YES
6) 9301 YES

[memory1]

1) Box model HR20-700 19E
2) 498 Yes (worked yesterday,then did not work this morning, now works again)
3) 480 Yes
4) 481 Yes
5) 9300 Yes
6) 9301 Yes

[nagy4321]

1) HR20-700 0x19e
2) N (had been working previously w/ sound ...now black screen)
3) Y
4) Y
5) Y
6) Y

1) HR20-700 0x19e
2) N (not sure if it had been today but working previously...now black screen)
3) Y
4) Y
5) Y
6) Y

[WRTBill]

Here is the scoop



Key Information:
1) 2-HR20s 700 running 0X18a
2) 498 No-blank screen
3) 480 y
4) 481 y
5) 9300 y
6) 9301 y


H20-600 running 0x2024
498=N
480=Y
481=Y
9300=Y, but see below
9301=y, but see below

H20 receives 9300 and 9301 for 1-2 minutes before the picture pixelates. The pixelation starts as a minor issue and quickly degrades to total freeze. After the picture freezes, the unit restarts itself or goes to searching for satellite signal message. Restarting the H20s corrects issues and the cycle starts all over.

[richardrblc]

h20-600 ce 2038
498 lost today
480 working
481 working
9300 working'
9301 working

[timmy1376]

1) HR20-100 and 0X18a
2) 498 No audio or video
3) 480 Yes, confirmed working
4) 481 Yes, confirmed working
5) 9300 Yes, confirmed audio and video
6) 9301 Yes, confirmed audio and video


I was just home dropping on my boy from preschool, checked 498 and now I get slide and audio....

[Tetonmtnbiker]

Jackson, Wyoming

Key Information:
1) HR20-700, 0x19E
2) 498 n
3) 480 y
4) 481 y
5) 9300 y
6) 9301 y

[chefmichael]

Key Information:
1) Box model and Sw version----------------HR20-700, 0x18a
2) 498 y/n----------------------------------------no (black screen)
3) 480 y/n----------------------------------------yes
4) 481 y/n----------------------------------------yes
5) 9300 y/n---------------------------------------yes
6) 9301 y/n---------------------------------------yes

Georgetown, TX

[K4SMX]

Hr20-700 (019e)

498 Y
480 Y
481 Y
9300 Y
9301 Y

H20-600 (2038)

498 Y
480 Y
481 Y
9300 Y
9301 Y

[Skins Fan]

For the first time iever, I am now getting any the test channels, I now get 9300 9301 480 481 but I get a black screen for 489. Haven't done anything since Friday / re-alignment, checked cables & etc.

I was so excited, I didn't follow instructions. So here it is:

1) Box model and Sw version---H20-100, 0x2021
2) 498 y/n-----------------------------------N Black Screen
3) 480 y/n-----------------------------------Y
4) 481 y/n-----------------------------------Y
5) 9300 y/n----------------------------------Y
6) 9301 y/n----------------------------------Y

[TivoNut]

1) HR20-700 0x19e from Zinwell WB68
2) 498 N
3) 480 Y
4) 481 Y
5) 9300 Y
6) 9301 Y

[QuickDrop]

Key Information:
1) HR200-100 |(Sorry, ignorant as to how to check for software version.)
2) 498 n
3) 480 y
4) 481 y
5) 9300 y
6) 9301 y

Also connected through a Zinwell 6x8 multiswitch.

This is the first time 498 (or any of the test channels) have failed for me.

[mjwagner]

Recievers as in sig
Slimline dish
Multi-switch - WNC SWA-48
2 direct sat lines form multi-switch to HR20-700
1 direct OTA line to HR20-700
SAT and OTA diplexed on single lines to each of the two H20-100's (BBC's at respective multi-switch outputs prior to OTA diplex)

results for all recievers:

498 - ok - note was working since they turned this channel on, and was working fine this morning, but is now black screen (suspect something on D's end)
480 - ok
481 - ok
9300 - ok
9301 - ok

[LP30]

Both tuners on each receiver tested on all listed channels
1) HR20-700 #1, 0x19d
2) 498 --------------- y (worked before)
3) 480 --------------- y
4) 481 --------------- y
5) 9300 -------------- y
6) 9301 -------------- y

1) HR20-700 #2 0x19d
2) 498 --------------- y (worked before)
3) 480 --------------- y
4) 481 --------------- y
5) 9300 -------------- y
6) 9301 -------------- y

1) HR20-700 #3, 0x19d
2) 498 --------------- y (never worked)
3) 480 --------------- y
4) 481 --------------- y
5) 9300 -------------- y
6) 9301 -------------- y

1) HR20-700 #4, 0x18a
2) 498 --------------- y (never worked)
3) 480 --------------- y
4) 481 --------------- y
5) 9300 -------------- y
6) 9301 -------------- y

[gwdtv3]

1) HR20-700, 0x18a
2) 498 N (was able to see the slide early this AM, nothing now)
3) 480 Y
4) 481 Y
5) 9300 Y
6) 9301 Y

[Boris&Tasha]

1) HR20-700 0x19d
2) 498 y
3) 480 y
4) 481 y
5) 9300 y
6) 9301 y


1) H20-600 0x2038
2) 498 y
3) 480 y
4) 481 y
5) 9300 y
6) 9301 y

[skakusha]

Miami/Fort Lauderdale Area

Box 1
1) HR20-700, 0x19e
2) 498 - n (worked before but now I get a black screen) As of 3:01 pm EST
3) 480 - y
4) 481 - y
5) 9300 - y
6) 9301 - y

Box 2
1) HR20-100, 0x18a
2) 498 - y
3) 480 - y
4) 481 - y
5) 9300 - y
6) 9301 - y

Box 3
1) HR20-700, 0x19e
2) 498 - n (worked before but now I get a black screen) As of 3:05 pm EST
3) 480 - y
4) 481 - y
5) 9300 - y
6) 9301 - y

Originally Box 1 was the only box that could see 498, now both 700 boxes cannot see it.

[djwww98]

1) Box model HR20-700 and Sw version 0x18a
2) 498 n
3) 480 y
4) 481 y
5) 9300 y
6) 9301 y
498 was no until 9300 and 9400 came on the first time, then yes. Now no.
My online account does NOT show any unusual hd charges/credits.

[azbob]

........H20-100 (0x2021).....HR20-700(0x18a).....HR20-700(0x19a)
480 --------Y--------------------Y---------------------Y-----------
481 --------Y--------------------Y---------------------Y-----------
498 ------ Blank Screen-----Blank Screen---------Blank Screen (NOW AT 12:16PM, ALL CAME BACK)
9300 -------Y-------------------Y---------------------Y-------------
9301 -------Y-------------------Y---------------------Y-------------

All Testing In Chandler Az, Noon Pst

[powerplay]

Key Information:
1) HR20-100, ZW-68, Slimline, 0x18a
2) 498 sometimes, not today
3) 480 y
4) 481 y
5) 9300 y
6) 9301 y

Please report for each and every MPEG-4 compatible equipment you have...

[mdmantia]

First: I want to thank you all for continuing to help in the manner that you are. Each and every data request has been helping, and you all are making a major impact... You really are:

---------

Test Channels 9300/9301 are back on the air... and there is no set turn off date/time. So enjoy them while they last...

---------

More data collecting:
(I reserve the right to change this later on today... and ask you to again report your results)

Key Information:
1) Box model and Sw version
2) 498 y/n
3) 480 y/n
4) 481 y/n
5) 9300 y/n
6) 9301 y/n

Please report for each and every MPEG-4 compatible equipment you have...

If you don't have the required equipment (5LNB, proper multiswitches, please don't vote).

HR20-700

0x19e

498 n

480 y

481 y

9300 y

9301 y

[chrisbarnes72]

1) HR20-100, 0x18a
2) 498 no, Lost it today
3) 480 bbc confirmed
4) 481 bbc confirmed
5) 9300 yes
6) 9301 yes

1) HR20-700, 0x19d
2) 498 no, Lost it today
3) 480 bbc confirmed
4) 481 bbc confirmed
5) 9300 yes
6) 9301 yes

[rjc]

(2) HR20-700, 0x18a
2) 498 N (was able to see the slide early this AM, nothing now)
3) 480 Y
4) 481 Y
5) 9300 Y
6) 9301 Y

H20
2) 498 N (was able to see the slide early this AM, nothing now)
3) 480 Y
4) 481 Y
5) 9300 Y
6) 9301 Y

[sdk009]

H20-100 w/2026 sftwr
498-Blank- up now at 12:50 PDT
480 Yes
481 Yes
9300 yes
9301 yes

HR-20-100 018a
498 Blank back up now at 12:50 PDT
480 Yes
481 Yes
9300 Yes
9301 Yes

[jlmza2350]

1) HR20-100, 0x18a
2) 498 no, Lost it today
3) 480 bbc confirmed
4) 481 bbc confirmed
5) 9300 yes
6) 9301 yes

1) HR20-700, 0x18a
2) 498 no, Lost it today
3) 480 bbc confirmed
4) 481 bbc confirmed
5) 9300 yes
6) 9301 yes

same set up and results in Minneapolis.

[hoboken]

H20 - 100 - Ox2021 -- 498 No --- All Others, Yes

[GCanada]

HR20-700

0x19e

498 n

480 y

481 y

9300 y

9301 y
exact same

[GP_23]

Earl from what I have seen at avsforum 1 person was having problems, everyone else was getting them loud and clear.

[LMUBill]

HR20-100 - version 2021
Yes to all

[ezegoin]

Key Information:
1) Box model ; Sw version - HR20-700 ; 0x18a
2) 498 - N
3) 480 - Y
4) 481 - Y
5) 9300 - Y
6) 9301 - Y

[SteveEJ]

Key Information:
1) Box model and Sw version----------------HR20-100, 0x18a - H20-100, 0x2036
2) 498 y/n----------------------------------------now gone - now gone
3) 480 y/n----------------------------------------yes - yes
4) 481 y/n----------------------------------------yes - yes
5) 9300 y/n---------------------------------------yes - yes
6) 9301 y/n---------------------------------------yes - yes


I was getting 498 on both receivers until the 9300/9301 channels came back online, the HR20 AFTER the test friday night, NOT BEFORE.

9300 video is out of sync with the audio. 9301 is great.

WEIRD:: Edit at 2:16 PM CST.. 498 is BACK ON on BOTH Receivers! Both came on at the same time! D* must have taken it down!

[csf97]

Receiving all test channels in Tuscaloosa, Alabama!
HR20 with 0x18a

[snowman33]

2 H20-600s with 0X2024
1 HR20-700 0X18A

Answers below for all three receivers

498 no - worked earlier
480 yes
481 yes
9300 yes
9301 yes

Cedar Rapids, Iowa

[vangiesk]

1) Box model and Sw version---1 HR20-100s, WB6x8,0x18a
2) 498 y/n-----------------------------------N (SFS) Tuner 1 & Tuner 2, both were working this morning
3) 480 y/n-----------------------------------N (SFS) Tuner 1 & Tuner 2, both were working this morning
4) 481 y/n-----------------------------------Y Tuner 1 & Tuner 2
5) 9300 y/n----------------------------------Y Tuner 1 & Tuner 2
6) 9301 y/n----------------------------------Y Tuner 1 & Tuner 2

1) Box model and Sw version---1 H20-100, WB6x8,0x2036
2) 498 y/n-----------------------------------N Blk Screen was working this morning
3) 480 y/n-----------------------------------Y
4) 481 y/n-----------------------------------Y
5) 9300 y/n----------------------------------Y
6) 9301 y/n----------------------------------Y

[jcaldwell]

1) HR20-100, 0x18a
2) 498 N (previously worked)
3) 480 Y
4) 481 Y
5) 9300 Y
6) 9301 Y

[Cybercowboy]

Key Information:
1) 1 HR20-700 with 0x18a, 2 H20's with 0x2021
2) 498 - Yes when it was up, No currently.
3) 480 - Yes
4) 481 - Yes
5) 9300 - Yes
6) 9301 - Yes

Whenever these channels have been active and I've tried them, they have worked.

[TimGoodwin]

All three of my HR-20's ( 2 700's 1 100 )

498 Black Screen ( was working before )
480 Yes
481 Yes
9300 Yes
9301 Yes

[dshu82]

1) H20-600, 0x2024
2) 498 Y
3) 480 Y
4) 481 Y
5) 9300 Y
6) 9301 Y

[tdbohannon]

DFW - loud and clear..
Key Information:
1) Box model and Sw version----------------HR20-700, latest CE version (whatever that is)
2) 498 y/n---------------------------------------- don't know, didn't have wife check but worked before
3) 480 y/n---------------------------------------- ditto
4) 481 y/n---------------------------------------- ditto
5) 9300 y/n---------------------------------------yes yes
6) 9301 y/n---------------------------------------yes yes

[VegasDen]

Key Information:
1) Box model and Sw version - HR20-700 018a
2) 498 y/n - N (previously Y)
3) 480 y/n - Y
4) 481 y/n - Y
5) 9300 y/n - Y
6) 9301 y/n - Y

[Deels1]

Key Information:
1) Box model and Sw version HR20-100/Ox18a
2) 498 y/n - no this afternoon... yes until this afternoon
3) 480 y/n - Yes
4) 481 y/n - Yes
5) 9300 y/n - Yes
6) 9301 y/n - Yes

[cbensinger]

Key Information:
1) HR20-700, 0x19E
2) 498 N - Just a grey screen
3) 480 y
4) 481 y
5) 9300 y
6) 9301 y

Chuck

Okay, two minutes after I posted 498 came back on...

[emrmc]

Key Information:
1) 1 HR20-700 with 0x18a
2) 498 - Just black, was working last test.
3) 480 - Yes
4) 481 - Yes
5) 9300 - Yes
6) 9301 - Yes

Located in NE PA.

[petergaryr]

Well, the HR20-100 in the living room tests fine. I can go from 9300 to 9301 and back again with no problem. I can also go from them to any other station and back again in any sequence.

The HR20-700 in the bedroom, though can get 9300 or 9301, as long as I stop by some other station in between. Looks like tuner 2 is OK, but something is up with tuner 1....it will display a 771 if I try to toggle between 9300 and 9301.

Weird, because eveything tested fine yesterday. Trying a reset.

After reset: no change.
Tried swapping B-band converters. No change.

It fails on either 480 or 481, depending on the sequence I tune in the channels. 498 always comes through without a problem.

[alanrob]

[
Key Information:
1) H20-600, 0x2038
2) 498 N, first time this has not worked
3) 480 Y
4) 481 Y
5) 9300 Y
6) 9301 Y

[kc_fan]

Living Room:
1) HR20-700 ox18a
2) 498 n (gray screen), but worked before 9300 and 9301 came online today
3) 480 y
4) 481 y
5) 9300 y
6) 9301 y


Bedroom:
1) HR20-700 ox18a
2) 498 n (gray screen), but worked before 9300 and 9301 came online today
3) 480 y
4) 481 y
5) 9300 y
6) 9301 y

Extra Info: I have a Zinwell wb68, and a third receiver a R15-500.

[dchamero]

I don't know why, but I got 721.... I have the HD package and I have the rest of the HD channels...