justpassinthru
01-09-03, 09:49 AM
I currently have a dual LNB DirecTV antenna. The two outputs feed a into a voltage switch along with the output of an off air antenna. The combined outputs then feed three Sony receivers. I am upgrading to HDTV and will now use a Terk TVS-25 3 LNB antenna with built in multi-switch to feed 4 receivers. Must I run two additional cables to now provide the feed to all of my receivers or, 1. Is there a device (cascading multi-switch) that would allow me to use a single run from the new antenna and split the feed to all the receivers?, or 2., Can I run the single feed into my current voltgage switch and expect it to work. All help or comments are appreciated