Can the Zinwell WB68 geed a regular splitter

[gio12]

with 2 lines from the WB68 to the MS, then 2 lines to the HR20 ?

So 4 lines for the dish to the WB68. Then 2 lines to one HR20, then the last 2 lines to a 2x4 MS.

This will be temporary until I can run new lines.

[Earl Bonovich]

Your thread was moved, as it has nothing to do with the CE process.

As to your question.

No...

The WB68 needs 4 feeds to function properly.

[waynebtx]

with 2 lines to feed one HR20 with 2 lines?

This will be temporary until I can run new lines.

Not sure what your asking. But if its can you use a splitter from one RG6 to make two lines for the HR20 . NO you cant.

[say-what]

You need 4 lines in from the dish and cannot split any of the outputs.

[gio12]

Your thread was moved, as it has nothing to do with the CE process.

As to your question.

No...

The WB68 needs 4 feeds to function properly.Whoops, wrong forum. I edited my question as I was asleep when I posted it :sure:.

[veryoldschool]

Whoops, wrong forum. I edited my question as I was asleep when I posted it :sure:.
You 2 x 4 multiswitch will only have either 101 or 110/119, with only two feeds.