Resolution Unchanged

[bwclark]

I have Native set to "ON", as I wish for the TV to do the scaling, so the front panel of the H20 should show the actual resolution of the channel selected.

When I use the Channel Selector, the resolution will change appropriately with channels of differing resolution. However, when I use the Guide and select a channel, the resolution remains unchanged?

What's the deal?
Currently on NASA and it shows 1080i.... :sure:

Software: 0x204C

This behavior does not occur on my HR20-100 with software: 0x1ea

[mjones73]

Check the DirecTV™ HD Receiver Q&A section for H20 help.

[davring]

Many times, I have found, the front resolution indicator lights do not reflect what is being output. I have checked on numerous occasions and my TV indicates the actual resolution being broadcast is correct, the lights were wrong.

[dtrell]

i have a similar problem with my HR21 where it doesnt correctly recognize some of the 720p channels such as BIGTENHD SPEEDHD and FUELHD as proper 720p channels, it loads them as 480i with certain key strokes and 720p with others (they are all 720p). so far noone on this forum has provided any help. Native Mode is on with mine. This occurs with both 0193 and 01f0 CE that i just loaded.