Installers in San Luis Obispo Cty, CA

[ChoppedLiver]

I need to contact an installer that services San Luis Obispo County CA. Namely Paso Robles. I need to discuss installation options before I call them out to my new house. They can't attach to the fascia board due to a gutter. Good news is the house came pre-wired so there is an access box in the eve with cable ran already. Any help is appreciated!

[GeoffL]

I live in San Luis Obispo and Ironwood Communcations is who did the install for my place. They were sent out by Directv. I live in a Condo and they didn't do a pre-install check, but, just adjusted how they installed to what I wanted and what the HOA allowed.

I gues you could also try local places like Coast Electronics or John Whitward (Sp?) Communications in Atascadero.

[BattleZone]

Most installers should have access to an under-eave mount, which bolts to a rafter tail and (for the large HD dish) has support arms that attach inside the gutter. This is a custom mount which you should expect to pay for at the time of installation.

[ChoppedLiver]

Most installers should have access to an under-eave mount, which bolts to a rafter tail and (for the large HD dish) has support arms that attach inside the gutter. This is a custom mount which you should expect to pay for at the time of installation.

Thanks for the info Geoff.

My problem here is that my eves are enclosed and stuccoed in. There are no exposed rafters... I guess I could remove a small section of the gutter and cap it off.

[BattleZone]

It sounds like you're either looking at the dish mounted on a SE-facing wall of the house, a pole mount in the yard, or some kind of custom work to get the dish safely mounted on the roof (the latter not likely to happen by an HSP tech at any price; you'd need a private contractor).