HR20 Setup

[theoldone]

Please help, in the hr20 setup is an option to set the satellite up, which satillite do you select under the many options provided. All I know is I have a 3 lnb dish but that is not an option. Everytime I select a 3lnb with a 72 of 95 satellite it says not to connect b-band converters and I know I need them and they or installed.
So, which option is correct?

[RobertE]

Please help, in the hr20 setup is an option to set the satellite up, which satillite do you select under the many options provided. All I know is I have a 3 lnb dish but that is not an option. Everytime I select a 3lnb with a 72 of 95 satellite it says not to connect b-band converters and I know I need them and they or installed.
So, which option is correct?

Just guessing you need to select the 5 LNB. Also select "Not Installed" for the 72.5 and 95 sats.

To clarify, take a look at your dish. The biggest mistake customers (and CSRs make) is counting the LNBs. Does it say Slimline on it? Does it look like this?
http://www.dbstalk.com/attachment.php?attachmentid=14754&stc=1&d=1217354063

Or does the LNB assembly look like two parts?

Then you need the Slimline-5 or 5-LNB dish selected.

You only need the 72.5 selected if you have a second 18 inch dish for your SD locals.

You only need the 95 selected if you are getting international programming (Russian, Hindi, etc).

[theoldone]

thanks, this helps. Looking at sat pics under FAQ it appears I have a AT9 large. So that corresponds to what option under the setup menu?

[RobertE]

thanks, this helps. Looking at sat pics under FAQ it appears I have a AT9 large. So that corresponds to what option under the setup menu?

Depending on your software versions Slimline-5 or 5-LNB Multisat

[theoldone]

thanks again, used the slimline 5 and got the local digital channels back.