PDA

View Full Version : Multiswitch to Combine 5 LNB with Off-Air?


tony000
08-08-08, 02:48 PM
Has anyone found a multiswitch that will combine the HD signal from a 5 LNB dish with the signal from an off-air antenna to allow both to be delivered by one coaxial cable to an H20 receiver and then split to be connected to the satellite and off-air inputs?

doctrsnoop
08-08-08, 03:03 PM
Just run the Standard Zinwell 6x8 out , then the BBC, then a diplexor (with the antenna feed), then the cable run, then diplex out

Kansas Zephyr
08-08-08, 03:22 PM
If you have 4, or fewer, IRDs then you don't need a multiswitch. There are 4 outputs on the dish.

But you must diplex AFTER the BBC, as stated above.

So:

DISH...coax...BBC...coax...DIPLEXER...coax...DIPLE XER...coax...IRD

With the OTA antenna feeding into the first diplexer, and split back out of the second.

Note: This is not approved by D*. Diplex at your own risk (and pleasure!) :)

dave29
08-08-08, 03:32 PM
or.... you can use a SWM. it is not supported by directv, but it does work