PDA

View Full Version : Cant get all sats on superdish with dp34


kkrs2005
01-21-09, 06:55 PM
hello all.
I am using dp34 with super dish 119, 118 and 110. DN receiver 311.
for some reason I am only getting sat 119. not getting 118 and 110. I did the test switch several times. but its only pulling one satellite. its not even recognizing the switch dp34.
this has been happening for several months. I even changed the rg6 cables, also put new dp34 switch. same results.

at the same time I am gettin all three sats on two different receiver without any problems. so not sure what the problem is.

I even tried to put the sats individually without the switch. could only get signal on 119. but 110 & 118 not getting any signal.

any suggestions would be appreciated.

garys
01-21-09, 07:09 PM
Cover the 119 lnb and see if you still have signal. You could be picking it up through the wrong lnb.

BattleZone
01-21-09, 07:54 PM
I'm assuming this is a SuperDish with a Plus dish conversion, so that it has the LNB to pick up 118.7 instead of 105 or 121. Also, I'm assuming that you have 2 receivers on the DP34 switch that work properly, and one that does not.

If a Check Switch doesn't fix the problem, then you have a failing tuner in the "bad" receiver.