PDA

View Full Version : Tivo R10 Recording


Gmoney18
02-23-09, 05:23 PM
I have a Tivo R10 that has 2 coax lines ran into the reciever, but im not able to record a program while watching a different program.

Does anyone know if this model will allow me to watch a program while i record a program at the same time?

New to the DVR, so it could be that i just didn't set it up correctly.

harsh
02-23-09, 05:26 PM
Properly set up, you should be able to record two live programs and watch a third recorded program.

Michael D'Angelo
02-23-09, 05:29 PM
I am moving this to the "DIRECTV Legacy Receiver" forum.

timmmaaayyy2003
02-23-09, 05:39 PM
Somewhere in the guided setup there is an option for 1 or 2 cables connected. you need to make sure that 2 is selected and that both are direct runs from the MS/dish. You cannot use a splitter at the rcvr to acheive 2 cables.

Gmoney18
02-23-09, 06:37 PM
Hey thanks for the help with that! I went through the steps like you posted and it works like a charm.

I knew it had something to do with the programming but didn't know where to even look.

Is there anything else these receivers do that might be worth knowing?

Gmoney18
02-23-09, 06:42 PM
I was able to set it up properly from following directions in the post below, and was only able to record two programs. i had to watch one of the two programs i was recording though.
That's all i really was needing to do is record one show while i watch another!

timmmaaayyy2003
02-24-09, 09:23 AM
Glad we could help.

Check over at tivocommunity.com for tips and remote codes. Mostly stuff like 30 second skip, etc.