PDA

View Full Version : upgrade dtv dish


gmac
06-15-09, 03:40 PM
I currently have the old large dish--with the side car (at9)
I would like to upgrade to slim line..I have looked at the various ones solid signal offers. I think I need the AU9-SLB5-SWM-B-PWS

Looking for the one that is capable of SWM.
Have two hr20's and the location of one is only capable of have one wire.
What dish do I need and any other accesories?

Thanks

Mertzen
06-15-09, 03:45 PM
You need:

http://www.sadoun.com/Sat/Products/Winegard/DIRECT10.jpg

AU9. You can plug & play since they are on the same pipe.

Then, according to your DMA you need the SL3S or SL5S. Not sure if you need 119 for you SD locals or anything else.

Mertzen
06-15-09, 03:49 PM
I would checkout eBay since SS's prices are high on this equipment. I do have an extra LNB for sale. PM me if interested.

gmac
06-15-09, 04:39 PM
need the 5 for locals.
would i need any thing else.

Mertzen
06-15-09, 04:41 PM
need the 5 for locals.
would i need any thing else.

WEll make sure that whomever you get the LNB from also includes the Power Inserter and a Splitter. Besides that you're good.

Check if your current dish has the monopoles [ support braces ] attached.

gmac
06-15-09, 04:46 PM
thanks for your help, braces are there.

Can you put the pwr inserter in the house?
can I use the splitter the original dish cam with(zinwell 8x6)

Mertzen
06-15-09, 04:48 PM
Can you put the pwr inserter in the house?

Yes. It has to be in the house. It isn't weatherproof.

gmac
06-15-09, 04:49 PM
splitter zinwell 8x6?

Mertzen
06-15-09, 04:55 PM
splitter zinwell 8x6?

Nah, that's a legacy switch.

You'll need a SWS splitter. In your case either a SWS2 or SWS4 in case you have upgrade plans.

gmac
06-15-09, 05:11 PM
ok thanks for your help got all the info I need.
au9dish, sws4 splitter and good to go.
have two hr20's and planning to upgrad to another one.

to clarify will an h20 work with my plans to upgrade?

Mertzen
06-15-09, 05:14 PM
Yes, all H2x and HR2x will work with SWM. MAke sure that any H20 is on the latest software [ if it has been active no issues with that though ]

gmac
06-15-09, 05:26 PM
Ok thanks alot.
got all the info I needed.

gmac
06-15-09, 08:56 PM
could not fine sws 4 splitter will this do;21V power supply and SWS-8 splitter

Mertzen
06-15-09, 09:05 PM
could not fine sws 4 splitter will this do;21V power supply and SWS-8 splitter

http://www.techtoolsupply.com/index.asp?PageAction=VIEWPROD&ProdID=2039

gmac
06-15-09, 09:06 PM
ok thanks

miketorse
06-15-09, 09:09 PM
You can buy a SWM-8 and just leave the Sidecar dish installed.

gmac
06-15-09, 10:16 PM
ok...thanks

idigg
06-16-09, 07:29 AM
I have a brand new 5LNB SWM + power inserter and 4way SWS switch, $45 shipped. PM me if interested.