View Full Version : MLB Mix navigation
when I am on the mlb mix channel the graphic comes up telling me to use the arrows to change the audio and if I hit select it will tune to that game channel, problem is when I hit the right button my tv apps loads, I hit the up arrow and my quick tune comes up, is there a way to disable those when on a mix channel?
Stewpidity
04-08-10, 05:51 PM
same issue here :confused:
Jimmy 440
04-08-10, 06:47 PM
I can't navigate on it either.
Jeremy W
04-08-10, 06:52 PM
I just checked it out, and it's working fine for me.
tonyd79
04-08-10, 09:01 PM
Did this start working for you guys? I had a problem with a mix channel like that a while back and a restart fixed it.
murry27409
04-08-10, 09:45 PM
It happened twice to me. Both times, flipping the tuner or changing channels restored the mix channel functionality. strange......
The Merg
04-08-10, 11:51 PM
It's possible that you are losing the active ability of the Active channel. Make sure that you don't hit the Exit button while on the channel. Also, I believe the Quick Guide (Blue Button) also turns off the active ability of a channel.
- Merg
Big Dawg 23
04-09-10, 04:59 AM
When you tune into any Mix Channel wait for the Yellow Box to highlight picture. Arrowing before that will trigger that arrow command on the remote.
mystic7
04-09-10, 05:38 AM
When you tune into any Mix Channel wait for the Yellow Box to highlight picture. Arrowing before that will trigger that arrow command on the remote.
Yellow box? The box on my MLB Mix is red! Is there something wrong with my tv? Should I get it fixed? Are you taking me seriously? :D
I've been having problems with the Mix channel from the beginning. Sometimes I don't get any boxes highlighted at all so I can't change from the first feed in the upper left. Yesterday, the entire screen was black except for the small area where the current time is shown. I don't remember having any problems at all the two previous years.
Dazed & Confused
04-09-10, 06:51 AM
I have been having trouble with the mix channel as well. It takes a long time for the active box to show, and sometimes it never shows up. Once the active box shows up it seems to work OK, but overall it is very erratic.
The Masters mix channel is even worse. I had a lot of problems with it yesterday.
ccsoftball7
04-09-10, 07:58 AM
Wait until you see the "press select" prompt. Hit select to clear, then it should navigate properly.
Yes I have to wait for the red navigation box to pop up before I can navigate the mix channels. On my insanely slow and glitchy HR21-100 DVR this takes a good 3 to 5 seconds everytime.
vBulletin® v3.7.6, Copyright ©2000-2012, Jelsoft Enterprises Ltd.