XFX GTX 285 + Samsung 2233rz Digital (Without HDCP) Help!

[leandrokoiti]

Hello everyone, whenever I try to open any recorded video from receiver I get the "...cannot connect to the receiver. The protected content cannot be played at this time" message, so I tried to run the playback advisor to see if everything was working and I got the following results:

CPU : Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz Yes
__dwItemID=1001__ : szLibCPUName = Intel(R) Core(TM)2 Quad CPU Q6600 @
__dwItemID=1002__ : dwLibClockRate = 3001
__dwItemID=1003__ : dwLibFamily = 6, dwLibModel=15, dwLibStepping=11
__dwItemID=1004__ : dwLibNumPhysicalProc = 4, dwLibNumCorePerPackage=4, dwLibNumLogicalPerCore=0
__dwItemID=1005__ : dwLibCorePerPackage = 4, dwLibTotalLogicals=4
__dwItemID=1006__ : szWMIName=Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
__dwItemID=1007__ : szWMIManufacturer=GenuineIntel
__dwItemID=1008__ : dwWMIMaxClockSpeed=3001
__dwItemID=1009__ : bBatteryExist=0
__dwItemID=1010__ : szGuess=Core 2 Quad Q6600
GPU (Hardware acceleration) : NVIDIA GeForce GTX 285 Yes
System Memory : 4096 MB Yes
Operating System : Windows Vista Service Pack 2 Yes
Graphics Card : NVIDIA GeForce GTX 285 Yes
__dwItemID=1301__ : Adapter Compatibility: NVIDIA
__dwItemID=1302__ : VideoProcessor: GeForce GTX 285
Screen Capture Protection : Yes Yes
__dwItemID=1304__ : NVAPI RGBOverlay=Yes
__dwItemID=1305__ : GPUDetectPass Yes
Graphics card video memory : 1024 MB
Graphics Card Driver : 8.17.11.9745 Yes
__dwItemID=1501__ : 2D Driver=8.17.11.9745
__dwItemID=1502__ : COPP=Yes
__dwItemID=1504__ : DEVICE=N/A
Video Connection Type : Digital (without HDCP) No More Info
Network Adapter : ETHERNET: Marvell Yukon 88E8053 PCI-E Gigabit Ethernet Controller #2 Yes
Network Adapter : ETHERNET: Marvell Yukon 88E8053 PCI-E Gigabit Ethernet Controller Yes
Program version : 1.0.0.2107
System language : 0409 ENU English English
Time : Thu Apr 29 11:38:51 2010
Computer : Desktop
System Name : LEANDROKOITI-PC

I'm using a DVI-D cable to connect my video card (gtx 285) to my monitor (samsung 2233rz), and I have the latest drivers installed for both my video card and my monitor, trying to run on Vista 64.
if I open the nvidia control panel to check the hdcp status it says it's working, but the results from the directv test are telling me otherwise...

is there anything else I should try to look for? I didn't try to connect to my monitor using another cable yet tho

thanks in advance!

[veryoldschool]

Hello everyone, whenever I try to open any recorded video from receiver I get the "...cannot connect to the receiver. The protected content cannot be played at this time" message, so I tried to run the playback advisor to see if everything was working and I got the following results:

CPU : Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz Yes
__dwItemID=1001__ : szLibCPUName = Intel(R) Core(TM)2 Quad CPU Q6600 @
__dwItemID=1002__ : dwLibClockRate = 3001
__dwItemID=1003__ : dwLibFamily = 6, dwLibModel=15, dwLibStepping=11
__dwItemID=1004__ : dwLibNumPhysicalProc = 4, dwLibNumCorePerPackage=4, dwLibNumLogicalPerCore=0
__dwItemID=1005__ : dwLibCorePerPackage = 4, dwLibTotalLogicals=4
__dwItemID=1006__ : szWMIName=Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
__dwItemID=1007__ : szWMIManufacturer=GenuineIntel
__dwItemID=1008__ : dwWMIMaxClockSpeed=3001
__dwItemID=1009__ : bBatteryExist=0
__dwItemID=1010__ : szGuess=Core 2 Quad Q6600
GPU (Hardware acceleration) : NVIDIA GeForce GTX 285 Yes
System Memory : 4096 MB Yes
Operating System : Windows Vista Service Pack 2 Yes
Graphics Card : NVIDIA GeForce GTX 285 Yes
__dwItemID=1301__ : Adapter Compatibility: NVIDIA
__dwItemID=1302__ : VideoProcessor: GeForce GTX 285
Screen Capture Protection : Yes Yes
__dwItemID=1304__ : NVAPI RGBOverlay=Yes
__dwItemID=1305__ : GPUDetectPass Yes
Graphics card video memory : 1024 MB
Graphics Card Driver : 8.17.11.9745 Yes
__dwItemID=1501__ : 2D Driver=8.17.11.9745
__dwItemID=1502__ : COPP=Yes
__dwItemID=1504__ : DEVICE=N/A
Video Connection Type : Digital (without HDCP) No More Info
Network Adapter : ETHERNET: Marvell Yukon 88E8053 PCI-E Gigabit Ethernet Controller #2 Yes
Network Adapter : ETHERNET: Marvell Yukon 88E8053 PCI-E Gigabit Ethernet Controller Yes
Program version : 1.0.0.2107
System language : 0409 ENU English English
Time : Thu Apr 29 11:38:51 2010
Computer : Desktop
System Name : LEANDROKOITI-PC

I'm using a DVI-D cable to connect my video card (gtx 285) to my monitor (samsung 2233rz), and I have the latest drivers installed for both my video card and my monitor, trying to run on Vista 64.
if I open the nvidia control panel to check the hdcp status it says it's working, but the results from the directv test are telling me otherwise...

is there anything else I should try to look for? I didn't try to connect to my monitor using another cable yet tho

thanks in advance!
The monitor needs to also support HDCP, which it doesn't look like it does from here:
http://www.samsung.com/us/consumer/office/monitors/specialty/LS22CMFKFV/ZA/index.idx?pagetype=prd_detail&tab=features

[leandrokoiti]

the funny thing is that the box come with a huge HDCP logo in it:
legitreviews.com/images/reviews/889/samsung_box.jpg
so I suppose it's HDCP compliant, but I decided to google about hdcp and 2233rz just to be sure after what u said and I found a guy saying that he had to change his refresh rate from 120hz to 60hz to become HDCP compliant and voilá

Check Item PC Playback Ready? Info
CPU : Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz Yes
__dwItemID=1001__ : szLibCPUName = Intel(R) Core(TM)2 Quad CPU Q6600 @
__dwItemID=1002__ : dwLibClockRate = 3000
__dwItemID=1003__ : dwLibFamily = 6, dwLibModel=15, dwLibStepping=11
__dwItemID=1004__ : dwLibNumPhysicalProc = 4, dwLibNumCorePerPackage=4, dwLibNumLogicalPerCore=0
__dwItemID=1005__ : dwLibCorePerPackage = 4, dwLibTotalLogicals=4
__dwItemID=1006__ : szWMIName=Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
__dwItemID=1007__ : szWMIManufacturer=GenuineIntel
__dwItemID=1008__ : dwWMIMaxClockSpeed=3001
__dwItemID=1009__ : bBatteryExist=0
__dwItemID=1010__ : szGuess=Core 2 Quad Q6600
GPU (Hardware acceleration) : NVIDIA GeForce GTX 285 Yes
System Memory : 4096 MB Yes
Operating System : Windows Vista Service Pack 2 Yes
Graphics Card : NVIDIA GeForce GTX 285 Yes
__dwItemID=1301__ : Adapter Compatibility: NVIDIA
__dwItemID=1302__ : VideoProcessor: GeForce GTX 285
Screen Capture Protection : Yes Yes
__dwItemID=1304__ : NVAPI RGBOverlay=Yes
__dwItemID=1305__ : GPUDetectPass Yes
Graphics card video memory : 1024 MB
Graphics Card Driver : 8.17.11.9745 Yes
__dwItemID=1501__ : 2D Driver=8.17.11.9745
__dwItemID=1502__ : COPP=Yes
__dwItemID=1504__ : DEVICE=N/A
Video Connection Type : Digital(with HDCP) Yes
Network Adapter : ETHERNET: Marvell Yukon 88E8053 PCI-E Gigabit Ethernet Controller #2 Yes
Network Adapter : ETHERNET: Marvell Yukon 88E8053 PCI-E Gigabit Ethernet Controller Yes
Program version : 1.0.0.2107
System language : 0409 ENU English English
Time : Thu Apr 29 14:03:24 2010
Computer : Desktop
System Name : LEANDROKOITI-PC

the problem is that I still can't play any video even after the positive result from the test, gonna try to reboot both my computer and the receiver to see if something changes