Bug Report/DVR Screen

[Eagles]

When I go into the DVR Management screen while viewing SD content upconverted to 1080i, the picture display is not lined up in the box. It's to the left. Under the same senario while viewing HD content the picture is to the left of the little box and bleeds almost all the way to the bottom of the screen.
This does not happen if viewing in the 480p or 480i modes. Picture is lined up
pretty close to center. :us:

[Mark Lamutt]

Eagles, please post your software version, Boot and Flash version when posting bug reports. We're all on the same version at the moment, but that may not be the case in the future, and it's a good idea now to get in the habit.

[James_Bruce]

I am having this problem in the guide, Video Preview is to the left, and the guide is dimmed down like it is in transparent mode, once the preview bled to the bottom if the screen. I looked and transparency is off, but when I hit menu, the menu is transparent. Powered off, Back on, same thing. Powered off, Unplugged, Powered on, Fixed.
Boot 120B
Flash F051
SW L142HECD-N
I am going to try to reproduce this..

[James_Bruce]

Ok got it, the video preview is spilling over to the left and the guide is dimmed, and the menus go transparent after I switch to the video input by going to 0000-0 then coming back to the guide. Unit will not turn back on after power off, green light comes on but no video. Have to unplug.