Best Cable for Dish Pro

[djtowle]

What is considered to be the best cable for a DishPro system? Manufacturer and Part # if possible.

I need outdoor and inwall (conduit) rating. Direct Burial not required.

I know RG-6 QS and 2.2 GHz are required but I have some with those specs from Carol Manufacturing and I am suspecting it is giving me a switching problem. See seperate post.

I've done some web searches but there are a Lot of cables out there... :eek2:

[boba]

What is considered to be the best cable for a DishPro system? Manufacturer and Part # if possible.

I need outdoor and inwall (conduit) rating. Direct Burial not required.

I know RG-6 QS and 2.2 GHz are required but I have some with those specs from Carol Manufacturing and I am suspecting it is giving me a switching problem. See seperate post.

I've done some web searches but there are a Lot of cables out there... :eek2:
There are lot of cables out there and 99.9% will work. Most problems come from bad connectors or crimped or penetrated cables rather than a bad cable.

[Mike500]

Any good RG6 except cheap 40% shield should work fine with DishPro. Quad shielded cable is not neccessary. 90% shielded is better. Carol cable should be fine. It is the brand made by General Cable and sold at most Home Depots.

[djtowle]

Now using all Dish Branded Switches and LNB's and no problems (knock on wood) with the Carol Cableing.