Hooking the 65 sat to the 921

[hideftech]

Have any of you hooked up the 921 to the 65 deg satellite for any of your local channels? I am assuming unlike the 6000 where one lead was sufficient you have to have at least a dual lnb to hook it up.. What switch would you use? Thanks Ron

[jsanders]

Have any of you hooked up the 921 to the 65 deg satellite for any of your local channels? I am assuming unlike the 6000 where one lead was sufficient you have to have at least a dual lnb to hook it up.. What switch would you use? Thanks Ron


I don't have the 61 sat, however, I do have 110, 119, and 148. I am using nothing more than legacy LNBs, and two legacy SW21 switches. Very simple to set up.

[rudolpht]

Legacy dish etc. use a SW64. 2 lines into switch for each of 61.5, 110, 119. Up to 4 lines out. Needs (comes with) a power inverter that hooks to first out line which passes through to a sat dish. For pro gear I have no idea.

[Mark Lamutt]

If you have legacy lnbs, the 61.5 dish must have a dual lnb, and you connect that to an SW64 switch. 2 lines from the SW64 then run to the 921.

If you have dishpro lnbs, then the 61.5 dish must have a dishpro single lnb and you connect to a DP34 switch. 2 lines from the DP34 run to the 921.