Help Transponder 9 101 no signal

[Rob]

I have a power multiswitch that Directv installed. I have 3 Directivo and they all are not receiving Transponder 9 on 101. Signal on A, B, and C are all good.

101

no signal on
4, 9, 12, 18, 20, 26, 28
transponder 7 47

and 11 45

Channels searching for satellite comes up:
232 Fine

236 E!
239
252
255
260
273

Help!

[Rob]

Okay, went onto the roof and undid the cables and reconnected them to the LNB at different positions. It's working now.

Thanks to all who responded with help. ;)

[redfishhunter]

I have a power multiswitch that Directv installed. I have 3 Directivo and they all are not receiving Transponder 9 on 101. Signal on A, B, and C are all good.

101

no signal on
4, 9, 12, 18, 20, 26, 28
transponder 7 47

and 11 45

Channels searching for satellite comes up:
232 Fine

236 E!
239
252
255
260
273

Help!
This is funny! I had the same problem with E* have a DP 34 switch. I usually do 119, 105, 110, 105 has our locals well this customer lost His locals I get there and go through the motions, the receiver sees the signal 80 for 105 very good for this area, but does not go through I have a green bar, :mad: so after an hour of this I decide to trade their 322. Hook the new 322 everything works great for a week....Well same problem...I decided to toggle 119 on port 1 110 on port 2 105 on port 3 it is been 2 weeks and it is working great???? What happen I will never find out....

[SimpleSimon]

redfishhunter: 119, 110, 'other' is the recommended order for a DP34. :)

[redfishhunter]

redfishhunter: 119, 110, 'other' is the recommended order for a DP34. :)
I know but I always put "other " in the middle. I installed over 200 dish that way and never had a problem, so now I am following the order... :grin:

[larrystotler]

Trans 4, 12, 18, 20, & 28 can show up as 0 on DTV on the 101. Should always have sig on the others.