Multiswitch question

[bocasierra]

I have two phase III DTV dishes. One gets the 101 and 110 sats and the other gets the 110 and 119 sats. From what I've read I can combine these signals by installing a multiswitch and running two cables from the 0khz outputs to the dish that gets 101 and two cables from the 22khz outputs to the dish that gets 110/119.

Will the Eagle Aspen DTV4X8 do this? It has 0 and 22 khz outputs, but does specifically say that it's cascadable.

[jdspencer]

Just to clarify your terminology. You will connect two lines from the 101 dish to the 0kHz INPUTS on the 4x8 multiswitch and two lines from the 110/119 dish to the 22kHz INPUTS on the multiswitch. But, that DTRV4x8 will work just fine.

[bocasierra]

Yes, thats what I meant - inputs to the multiswitch, not outputs.

Thanks for confirming the switch will work. It was quite a pain watching the NFL Sunday Ticket HD games last week from two different dishes. A whole lot of cable swapping was going on at the receiver. :eek2: