PDA

View Full Version : Fss 121 And Legacy 119

avex
12-19-04, 04:12 PM
Is it possible that I can use a fss ku band lnb pointed to 121 and legacy dss lnb pointed to 119 use a sw21 will I be able to get both satellites to work? I need to make sure all transponders work not just the odds on 121.
Jacob S
12-19-04, 04:51 PM
No, all of the lnbf and switch configurations must either be DishPro or Legacy. The FSS lnbf's are DishPro.
SimpleSimon
12-19-04, 05:54 PM
I think he meant a non-Dish FSS LNB.

If so, then if it has a voltage-switched output, it should work.

P.S. Welcome aboard, avex!
geobernd
12-19-04, 06:24 PM
Yes - it works (that's what I am using). You want the dish for 121 to be 30" or more - otherwise you might not get a good signal...
Run 119 into Input 1 on the SW21 and 121 into input 2.
For KU FSS LNB: It must be a 'standard' LNB with a Lo of 10.750 (e.g. ASC321S or Pansat LT5500). Universal LNBs (that have two Lo's with 22KHz tone switching or Diseq) do NOT work with E*.