322 receiver and tivo HELP ME PLEASE!!!

[trpullin]

Ok, heres the problem, I just got dish and they installed the 322 receivers, I have 2 tivos, one is a humax series2 80 hour and the other is a 40 hour series2 by tivo. im trying to get the 80 hour working with the dish 322 receiver. first of all i checked the ird blaster and its working properly, i get the guide and all of the tivo stuff. its when i try to change channels it will not turn the dish receiver. I tried the codes 10001a,b,c and 10011a,b,c, and 10045, 10046, 10047a,b,and c for all. no luck.tried unhooking the uhf transmitter in case it was interfering and didnt help. it is pluged into tv1 port. any sugestions?

[Miner]

Just a thought; try the TIVO plugged into TV2 port. It could be the TV1 will only work with the UHF remote.

Mark

[trpullin]

Tv2 is for the uhf, thanks though
just wondering if it might be a different ird code

[DishSubLA]

Could you be a bit more specific about your problem. Is the problem that the blaster can't change channels for TV 2, TV 1, or both? And would the 20 built-in timers of the 322 be enough for your needs? I have found that the problem is that other manufactures provide only the IR for remote address 1, not any other IR or RF remote addresses of the several that Echostar designs its boxes to use.

[trpullin]

I got it figured out, I had to go into the settings and change the address of the remote to 1.