No channel 75 or 95 why?

[gumby]

Ok, changed out my h20 to a sony hd200, now I do not get 75(tnthd) or 95, have talked to support many times,nothing. Have tried to reset, unplug-wait, changed cards, nothing. All other HD channels are fine. Is it an mpeg4 issue? Since the sony is a mpeg2 reciever?

Thanks,
john

[beavis]

Any OSD's on those 2 stations? (Searching for Satellite, Call Ext. 721, 711, 745, etc.)

Is the Sony programmed for the Oval-3 sat? Sometimes it takes programming it to round then back to Oval-3 for it to work.

[gumby]

The only OSD is "no signal". It is set up for oval-3 sat. Ihave good signals on all of the sat's-A,B,C. To me the reciever does not realize that channel 75,95 exist?

[Earl Bonovich]

95 I can understand... as it might not be "on" right now.

As for 75... dont' know... have them remove and re-add your HD Package

[beavis]

Usually an OSD of "No Signal" is from your TV when you're trying to access an input that nothing's connected to. Disconnecting/reconnecting the HD package may work.

[harsh]

Is it an mpeg4 issue?At this point, all of the nationals are MPEG2.