Tuner 2 not acquired after power outage

[Qtzar]

A few days ago we had a bad storm and we lost power for a while. When power came back up it took about 25 minutes for the HR20-700 to come back on.

Yesterday we noticed that Tuner 2 is no longer working. In the sat & Ant test it is showing up as not acquired.

What is the best course of action to get it working again.

[HDTVsportsfan]

Have you reset the unit since the power came back on thru the menu?

[sbender]

I was having the exact same problem. An it also happened after a power outage. I tried unplugging the receiver to reset and also went through the Sat setup again. When it did the tests, it said that Tuner 2 was OK, but I was not getting any signal reading on the second tuner. (Not even zero's showing up)

I then had a problem with only even transponders getting a signal, others showed 0 signal strength. Not sure if it matters, but it's been cloudy and rainy today. Everything (except the second tuner) started working without me doing anything.

Then I read this post and tried "Reset Receiver" from the menu and the second tuner is now working. Thanks!

[Qtzar]

Ahh, the 'Restart Recorder' in the reset menu worked like a charm.

Cheers.

[HDTVsportsfan]

Good.

I'm glad you got it workin'. Have fun.