chd176
07-15-07, 04:17 PM
I have a question about an install I am going to have on tuesday. I currently have a two story four bedroom home with a round 18" SD dish pole mounted on an old pole used for a primestar dish. I am sure the streamline will install on the old pole because it is 2" diameter and VERY sturdy. I do have a question about some of my recievers. I currently have all SD recievers a Directv Tivo (R10) downstairs with two inputs for my dual tuners and a D12 and D10 also downstairs. Upstairs I have another D10 and a D12. I plan to relocate my Directv Tivo to replace the D10 downstairs but I only have one coax input in that room. I also plan to install my new HR20 where the Tivo was so everything should be fine except another cable ran for OTA. I want to replace my current D12 upstairs with the new H20. Would I be able to get another cable ran upstairs and downstairs for OTA onthe new HD recievers or will I need to install that myself prior to the installation of the streamline. Another thing I currently have 2 multiswitches for all of my recievers will I get a new zinwell when I upgrade also? I understand that I can't have my OTA diplexed into the multiswitch like I do now because of the frequency of the new HD channels and the OTA frequencies is that correct? I have all of my multiswitches installed under my house so I won't have a million wires running everywhere getting in the way of yard work. Will I be able to get my new multiswitch install in the same location as my others? Thanks in advance!