H20 update help [Archive]

sb40

07-31-07, 08:32 AM

chevroletman20042000

07-31-07, 08:43 AM

I received the H20 update and it locked the receiver, i pulled the plug and it started but now the remote does nothing.

Please help with remote reset or tell me how to make the changes to fix RF/IR ?

Thanks

P.S.

I'm in MI did anyone else get this update ?

use your front panel buttons and go to menu then setup then go to remote and from there select reset remote and then just follow the on screen instructions

sb40

07-31-07, 08:47 AM

use your front panel buttons and go to menu then setup then go to remote and from there select reset remote and then just follow the on screen instructions

Yes i did try that it goes something like this : hold mute select
then type 981 to reset . however that did nothing :confused:

chevroletman20042000

07-31-07, 09:02 AM

Yes i did try that it goes something like this : hold mute select
then type 981 to reset . however that did nothing :confused:

you might wanna try a reset everything from the setup screen to see if that might help. then try doing the reset remote again.

veryoldschool

07-31-07, 09:12 AM

When I have problems I go back to default [IR] with front panel buttons and gain control again. FWIW

sb40

07-31-07, 10:45 AM

When I have problems I go back to default [IR] with front panel buttons and gain control again. FWIW

Ok that worked and the problems was the remote rc32 wold not work in RF
had to change to rc24. Before x2021 upgrade it must have worked even if I had the menu set to RF, must have just defulted to IR.

Thanks for the help.

veryoldschool

07-31-07, 11:00 AM

Ok that worked and the problems was the remote rc32 wold not work in RF
had to change to rc24. Before x2021 upgrade it must have worked even if I had the menu set to RF, must have just defulted to IR.
Thanks for the help.
I've read where the older software worked in both modes [set to RF and still sent IR], where the new version works in either/or.

OH yeah, the RC-32 isn't RF capable, you should have been sent the RC-34 that is. :nono:

sb40

07-31-07, 11:53 AM

I've read where the older software worked in both modes [set to RF and still sent IR], where the new version works in either/or.

OH yeah, the RC-32 isn't RF capable, you should have been sent the RC-34 that is. :nono:

Lucking I had the RC24 setting around others won't be so lucky:nono2:

FHSPSU67

07-31-07, 01:45 PM

I've read where the older software worked in both modes [set to RF and still sent IR], where the new version works in either/or.

OH yeah, the RC-32 isn't RF capable, you should have been sent the RC-34 that is. :nono:

I got the RC-32 with all my H20's (one 100 and two 600's) and finally got a RC-34 with my HR20-100.

max190

07-31-07, 04:24 PM

What is the real reason for this 'forced' update?

I thought I read somewhere that it is for HDMI compatibility? :confused:

If my H20 is working properly over HDMI to my Samsung LCD is there a way to block this update?
I mean why break (remote issue with sb40) and cause problems to a working system...