oldsatguy
08-22-07, 06:05 PM
I have a working 1000.2/622 and am installing a second 1000.2/622. 2nd unit will be roof mount so I've mounted to a non-penetrating platform and temporarly set it all up pretty close to my working unit. Mast mounted plumb, platform flat. Both antennas set for AZ 152 EL 45 SK 81 (94578/oak/ca). Compass says I'm pointing at 152 but no signal... Don't have a signal meter but can't get anything on Point Dish screen, Sat 119, tspdr 11. Check Switch says 3 LNB OK. One RG-6 from Port 1 to DP Plus Seperator and Seperator to Sat1 and Sat 2 in. In this temp set-up I do not have a physical ground from seperator to ground. Using 3 prong plug receiver to outlet and outlet has ground... any help or ideas would be appreciated. Thanks!