1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. Welcome to the new DBSTalk community platform. We have recently migrated to a community platform called Xenfono and hope you will find this change to your liking. There are some differences, but for the most part, if you just post and read, that will all be the same. If you have questions, please post them in the Forum Support area. Thanks!

Alaska/Hawaii 110/119 Aiming Help

Discussion in 'DIRECTV Installation/MDU Discussion' started by stevehifi, Oct 1, 2013.

  1. stevehifi

    stevehifi New Member

    1
    0
    Oct 1, 2013
    Atlanta, GA
    We need to add a 110/119 kit on a 1.2m dish to an MDU MFH2 installation. Currently have a 99/101/103 dish working great. We can find no information on how to aim the second dish with the 110/119 kit. We are located in Atlanta. We have an AIM meter. Any help on the settings for aiming this as well as how to dial it in with the AIM meter would be greatly appreciated.
     
  2. HoTat2

    HoTat2 Hall Of Fame

    7,081
    165
    Nov 16, 2005
    Los...
    Once the 110/119 companion dish is properly hooked into the 99, 101, 103 one, you should be able to treat the entire two dish assembly like the equivalent of a Slimline-5 with a conventional (non-SWiM) 4 output LNBF.

    So you can hook the AIM to any of the four coax runs leading to the SWiM multiswitch and set it for aiming a conventional SL-5 and skip to the procedure for aligning the LNB's 119 position. Then go to dishpointer.com, put in your location or zip code, then below select "Multi-LNB Setups" and in the drop-down box select "110 & 119" and align the companion dish to those coordinates and tilt, peaking the signal level on the AIM in the process.

    Should work.
     

Share This Page