1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. Welcome to the new DBSTalk community platform. We have recently migrated to a community platform called Xenfono and hope you will find this change to your liking. There are some differences, but for the most part, if you just post and read, that will all be the same. If you have questions, please post them in the Forum Support area. Thanks!

ARRX18G X-Sight Universal Remote Codes For HR22-100 & HR21-100

Discussion in 'Miscellaneous Equipment' started by NOSTRESS, Feb 20, 2012.

  1. NOSTRESS

    NOSTRESS New Member

    3
    0
    Apr 15, 2011
    I have 2 Directv HD DVRs in the same room and I'm trying to set-up an AR X-Sight universal remote. Apparently they only have one code in thier data bank because reguardless of which one I choose, DVR1 or DVR2, only DVR1 responds. I currently have both DVRs on the IR setting. Any suggestions? PS-I'm also waiting for a response from the AR Help web-site.
    Thanks
     
  2. mdavej

    mdavej Hall Of Fame

    2,401
    32
    Jan 30, 2007
    That's correct. You'll have to set DVR2 and its remote to address 2, then learn all the commands from that remote. It's in the advanced remote setup on the DVR. The code for address 2 on the DirecTV remote is 00002.

    Alternately, here's something else to try. It's is a long shot, but it might work. DirecTV address 1 is SAT 1377 (C1377 in Xsight terms I think). On some UEI remotes, 1378 is address 2. So you could give that a try. I think you can enter a device code like that on the remote itself, not in the software. Regardless, you'll have to also set the DVR to address 2 using the DirecTV remote as well.

    Let us know what AR support says about it.
     
  3. NOSTRESS

    NOSTRESS New Member

    3
    0
    Apr 15, 2011
    1378 Worked!!!!! Thanks Alot
     
  4. NOSTRESS

    NOSTRESS New Member

    3
    0
    Apr 15, 2011
    By the way AR never got back to me
     

Share This Page