1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. Welcome to the new DBSTalk community platform. We have recently migrated to a community platform called Xenfono and hope you will find this change to your liking. There are some differences, but for the most part, if you just post and read, that will all be the same. If you have questions, please post them in the Forum Support area. Thanks!

cckw webpage config

Discussion in 'DIRECTV Tips and Resources' started by mrjussellr, Apr 18, 2012.

  1. mrjussellr

    mrjussellr Cool Member

    Jul 3, 2010
    I am trying to find out how to configure the cckw with a browser

    (directv cinema connection kit wireless)

    Can any one tell me how to do this ?

    I looked all over and cant find info on this but I was advised it can be done.
  2. Stuart Sweet

    Stuart Sweet The Shadow Knows!

    Jun 18, 2006
    Here's the first look on that CCK-W: http://www.dbstalk.com/showthread.php?t=193851

    Here's the procedure:
    Do NOT connect the CCK-W to your router.
    Connect the CCK-W via ethernet to a computer that is not connected to the internet. Straight cable, not a crossover.
    Browse to (It may be necessary to set the computer's IP address to and the gateway to
    Username and password are both admin
    Beyond that, it's all browser based. If you want to configure it that way, you're probably well versed in networking so you won't have a problem.

    After you've done that and connected to the coax network, you should have four green lights; one may flash slowly. You can consult your router's DHCP table to get the device's new IP address, and should you need to administer it, browse to http://assigned_ip_address:8080
  3. mrjussellr

    mrjussellr Cool Member

    Jul 3, 2010
    Awesome thanks!
  4. mrjussellr

    mrjussellr Cool Member

    Jul 3, 2010
    Hope these images can help someone :)

    Attached Files:

Share This Page