1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. Welcome to the new DBSTalk community platform. We have recently migrated to a community platform called Xenfono and hope you will find this change to your liking. There are some differences, but for the most part, if you just post and read, that will all be the same. If you have questions, please post them in the Forum Support area. Thanks!

Checking whole home performance

Discussion in 'DIRECTV Connected Home' started by jford951, May 7, 2013.

  1. May 7, 2013 #1 of 10
    jford951

    jford951 Godfather

    447
    1
    Oct 6, 2008
    Is the a way to check my hr34 for the MRV performance? I seem to be getting some issues where the video and audio freeze then start again it dosent seem to miss anything just stops. Is there a way to check any kinda of output #'s? I am using a Samsung tv for client so don't know if there is issue in that the hr34, the network or the deca at the tv
    Thanks
     
  2. May 7, 2013 #2 of 10
    Brandon Wedgeworth

    Brandon Wedgeworth Administrator Staff Member Administrator DBSTalk Gold Club

    591
    6
    Jan 6, 2007
    Alabaster, AL
    1 person likes this.
  3. May 8, 2013 #3 of 10
    jford951

    jford951 Godfather

    447
    1
    Oct 6, 2008
    So what are good #'s
    Phy levels
    -24
    -38
    -35
    -37
    -37
    Dropped session count is 54
     
  4. May 8, 2013 #4 of 10
    Steve

    Steve DIRECTV A-Team

    23,031
    147
    Aug 22, 2006
    Lower...
    Don't worry about dropped session count. There may be one or two "real" dropped sessions, but the majority, if not all, of those are due to turning your Samsung RVU client off.

    Phy levels look like they're in range.
     
  5. acostapimps

    acostapimps Hall Of Famer

    1,866
    50
    Nov 5, 2011
    Illinois
    Why does whole-home takes long to playback recordings on my HR24?, originally recorded on HR22, both are Ethernet connected which does show the name assigned to the DVR and authorized, I don't have freeze-ups or dropouts other than playback delay
     
  6. peds48

    peds48 DIRECTV A-Team DBSTalk Club

    18,406
    909
    Jan 10, 2008
    NY
    There is certainly a delay when sending commands through the network, I guess the longer delay might be on how our network is designed
     
  7. veryoldschool

    veryoldschool Lifetime Achiever DBSTalk Club

    42,646
    338
    Dec 9, 2006
    Some of this may be the HR22 is just a bit slow being the server.
    Checking MRV playback the other direction from the HR24 to the HR22 might be different.
     
  8. dennisj00

    dennisj00 Hall Of Fame

    9,673
    189
    Sep 27, 2007
    Lake Norman, NC
    My 2 HR22-100s are in the guest room and are slow to 'wake up' even when I go in there to check something. After that, they're fine until no use. The first mrv is a little slow starting but subsequent is fine.
     
  9. acostapimps

    acostapimps Hall Of Famer

    1,866
    50
    Nov 5, 2011
    Illinois
    That is definitely what I see when I playback recordings from the 24 to the 22 that it plays with less delay, the other way around its a hassle trying to see picture for at least 5-10 seconds.
     
  10. RAD

    RAD DIRECTV A-Team

    16,397
    117
    Aug 5, 2002
    Dripping...
    I'm going to say it's the TVs RVU client that's the fault. I've seen the same thing with my Samsung RVU client while the C41 client I also have on the same TV doesn't do it. Sometimes when I see it do this a skip back will clear the problem.
     

Share This Page