1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Direct TV HD DVR vs Yamaha RX-V565

Discussion in 'DIRECTV Tips and Resources' started by Cwire, Apr 3, 2010.

  1. Cwire

    Cwire New Member

    2
    0
    Apr 3, 2010
    Boy I am new here and have no clue if I am in the right place. I just bought a Yamaha RX-V565 Receiver and I have Direct TV. I'm using a Direct TV HD DVR and I am trying to hook up the DVR though the receiver. I hooked the HDMI from the line out in the back of the dvr and into the HDMI input on the receiver but I get no sound or video? My Blue Ray player works just fine and the only way I was able to make it work proper was to run a HDMI cable direct from the DVR to the TV and then an Optical cable from the DVR to the Receiver. I was under the assumption that I just needed to go direct from the dvr to the receiver and I would be good to go? Any advise would be great as you all know the owners manual's for these things are terrible. Thanks in Advance!
     
  2. hdtvluvr

    hdtvluvr Legend

    194
    0
    Mar 1, 2008
    Check you manual for Monitor check in the advanced menu. Figure out how to get there and turn it off. This may solve the problem. If it doesn't I'd check out:

    avsforum

    Let us know how you fix it.
     
  3. CCarncross

    CCarncross Hall Of Fame

    7,058
    60
    Jul 19, 2005
    Jackson
    Most of the digital inputs are assignable, make sure you have that particular HDMI input associated with the correct selection, like TV, or sat, etc...HDMI inputs usually have a choice. For example I have HDMI2 on my Denon set as SAT input...so when I select sat on the remote, I get the audio and video from my dvr.
     
  4. Cwire

    Cwire New Member

    2
    0
    Apr 3, 2010
    I'll give that a try!
     

Share This Page