1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Dish and Dolby

Discussion in 'General DISH™ Discussion' started by ckr74, Jun 5, 2010.

  1. ckr74

    ckr74 New Member

    2
    0
    May 24, 2010
    I just switched from Directtv to Dish and my surround sound is different. I have an older SHerwood with Dolby. Is there some setting on a 722 that needs to be adjusted? Sounds like it won't decode. Thanks!
     
  2. RasputinAXP

    RasputinAXP Kwisatz Haderach of Cordcuttery

    3,145
    11
    Jan 23, 2008
    HDMI or optical?
     
  3. normang

    normang Icon

    1,017
    0
    Nov 14, 2002
    There are Digital Dolby and PCM settings in preferences, you may need to check and change those settings to see if it that resolves your issue.
     
  4. ckr74

    ckr74 New Member

    2
    0
    May 24, 2010
    I finally got some time to figure this problem out. I had to use the RCA connections from the receiver to DVD player. The installer used a splitter with coax to connect the two. Sounds really good now. THanks!
     
  5. JWKessler

    JWKessler Legend

    176
    2
    Jun 2, 2004
    That reminds me that when I installed an HDMI splitter on the HDMI output of my 722 so I could drive both my Projector and a TV, I lost my Dolby 5.1. All I got was stereo. I fixed that by moving the splitter to the HDMI output of my AV Receiver.
     

Share This Page