I have a 722, on version L722, in dual mode and I'm having an issue with a pair of timers, one is 11 in priority list, a 1 hour show, the other is 54 in the list and a 30 minute show. They both start at the same time, and so the #11 show is usually the one that gets recorded, as long as it's a new episode. This would be as expected, and how it's worked as long as I've had these 2 timers set up(maybe 4 months?). It's also how all timers have worked in the past, on this DVR and my previous one, going back around 6 years. Starting 2 weeks ago, both timers record, the #54 records, then when it's done, at 8:33, the #11 show records from then until 9:03. I end up with #54 recorded in it's entirety, and the last 30 minutes of #11 recorded as a seperate event. I expect #54 to not record at all, and #11 to be recorded completely. That's why it's #11 on the priority list, and why I moved #54 down to 54 back when I started recording #11. I've started a new thread for this, as I'm not seeing quite this problem anywhere else.