1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Equipment needed for installation

Discussion in 'ViP211(411)/211K/222 Support Forum' started by kvh79, Jan 25, 2012.

  1. kvh79

    kvh79 New Member

    2
    0
    Jan 25, 2012
    I am going to be upgrading to HD and I will be using a 222k receiver. I have the 3 LNB's that I need, but I am unsure of what I need in between the dish and the receiver. I thought all I would need is a DP44 switch, but after looking at a few different diagrams I am now confused. Please let me know.

    TIA,
    Ken
     
  2. BobaBird

    BobaBird EKB Editor

    4,022
    0
    Mar 30, 2002
    :welcome_s to DBSTalk!

    There is no "DP44" switch, so I'm not sure if you meant DP34 or DPP44.

    The DP34 requires a line be run to each tuner input.

    The DPP44 is a DishPro Plus switch which lets you use just 1 line to the receiver with a DPP Separator at the back to feed the 2 inputs. You can do the same with the DPP33 which doesn't require a power inserter.

    Where in AK are you, and what size dish do you have for each slot?
     
  3. john payne

    john payne Mentor

    50
    0
    Apr 23, 2009
    what satellite locations are you pulling in?
     
  4. kvh79

    kvh79 New Member

    2
    0
    Jan 25, 2012
    The locations are 110, 119, 129


    The dish is a 60" dish. Looking at the DPP33 and it states that it does not work with 1000.2 LNBF's so I am assuming that I have to use the DPP44.
     

Share This Page