I've finally had enough with my unreliable MVR over WiFi, it seems to work well if nothing is currently recording on any DVR but it becomes unwatchable if any DVR is taping. I'm not sure how a taping program affects network performance but that seems to be the case. That being said I'm finally going to move to DECA and want to make sure I get all the needed pieces. My current set is like the below picture, I have the SWM8 and 8 port splitter outside in a weather proof enclosure, due to how the existing wiring was done. Think older brick house with all wiring on the exterior. I have the PI inside before my HR22-100. Ignore the MRV, it's the only pic I could find with the PI after the splitter) Here is my list of receivers I want to put on MVR and what I think I need. HR22-100 - DECA HR20-700 - DECA H21-200 - DECA HR20-100 - DECA, BSF, 1x2 splitter(does this need to be a green label 2 way splitter) Additional DECA + power supply - to get the receivers on my network/internet. EDIT: I just noticed they now have DECABB1MR0 which can replace the extra DECA for connection to the internet? This includes a power supply and seems to be cheaper then a DECA and PS.