1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. Welcome to the new DBSTalk community platform. We have recently migrated to a community platform called Xenfono and hope you will find this change to your liking. There are some differences, but for the most part, if you just post and read, that will all be the same. If you have questions, please post them in the Forum Support area. Thanks!

HR-24/TV Remote Code problem

Discussion in 'DIRECTV General Discussion' started by Parsonsbri, Aug 8, 2010.

  1. Parsonsbri

    Parsonsbri Cool Member

    12
    0
    Oct 26, 2006
    Ohio
    I am totally perplexed. I have an HR24 in a room with a Norcent LT3222 television. When I use the on screen menu set up the remote code for the TV, a screen comes up and asks you to press vol+ to check if it works. When I do this, the volume works. Then I press "it worked" to go back to normal operation. When I do so, the remote no longer controls volume. I have tried moving the switch on the top to TV, but still nothing.
    The remote is the RC-65RX.

    I would appreciate any feedback.

    Thanks.
     
  2. WestDC

    WestDC DIRECTV A-Team DBSTalk Club

    2,443
    105
    Feb 9, 2008
    Try this:

    Move the switch to TV

    press mute, select untill the green lite winks twinks twice under the TV switch

    press 991,1 ponit the remote at the TV -press the channel up button untill the TV turns off

    Press select then press mute select again then type in 960 for the tv inpiut option.

    press the power button and the tv should turn on.
     
  3. Edmund

    Edmund Remote Master

    1,781
    12
    Apr 17, 2003
    Southern Ca
    Memorize the code that worked, turn off the receiver and program the remote directly:

    1. tv
    2. press and hold MUTE & SELECT, wait for two blinks, release
    3. enter tv code

    If the volume still does work, try the following:

    1. tv
    2. press and hold MUTE & SELECT, wait for two blinks, release
    3. enter 9 9 3
    4. press SELECT

    if still doesn't work, this next:

    1. tv
    2. press and hold MUTE & SELECT, wait for two blinks, release
    3. enter 9 6 3
    4. press CH UP
     
  4. Parsonsbri

    Parsonsbri Cool Member

    12
    0
    Oct 26, 2006
    Ohio
    here's the thing. The new HR 24 does not tell you what the code is. It just shows up as the model number for the TV. It does it automatically.
     
  5. TheRatPatrol

    TheRatPatrol Hall Of Fame

    7,172
    166
    Oct 1, 2003
    Phoenix, AZ
    Try codes 11591, 11365, 11589, 11590, 10824, 11089
     
  6. harsh

    harsh Beware the Attack Basset

    21,192
    182
    Jun 14, 2003
    Salem, OR
    This is almost certainly why Edmund recommended turning off the receiver when programming the remote.
     
  7. Edmund

    Edmund Remote Master

    1,781
    12
    Apr 17, 2003
    Southern Ca
    add 10748 to the list.
     

Share This Page