1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

HR22-100 Programming 2 Remotes

Discussion in 'DIRECTV Tips and Resources' started by mysdak, Nov 28, 2009.

  1. mysdak

    mysdak New Member

    6
    0
    Mar 5, 2007
    For the life of me, I can't get a 2nd remote (RC65R) to work with this receiver. Want to use it for the tV in my home office that runs of the hr22 receiver. Any help would be greatly appreciated.

    Thanks
     
  2. mysdak

    mysdak New Member

    6
    0
    Mar 5, 2007
    Do the same for both remotes...
    1. Locate the 12 digit Receiver ID (RID) number of your
    DIRECTV Receiver. You can find the RID number on
    the back panel of your receiver, or inside the card
    access door next to the reset button.
    2. Write down the last six digits of the RID number.
    3. Slide the mode switch to DIRECTV, AV1, or AV2.
    4. Press and hold the MUTE and SELECT keys until the
    green light under the selected switch flashes twice and
    release both keys.
    5. Using the number keys, enter 9 6 1. (The green light
    flashes twice.)
    6. Press and release CHAN UP. (The green light flashes
    twice.)
    7. Using the NUMBER keys, enter the the last six digits of
    the RID number. (See step 2 above.)
    8. Press and release the SELECT key. (The green light
    flashes twice.)
     
  3. thekochs

    thekochs DirecTV 10yr+ Customer

    1,009
    2
    Oct 7, 2006
    Listed in this How-To thread as FYI:
    http://www.dbstalk.com/showthread.php?t=94875
     

Share This Page