Separate names with a comma.
Discussion in 'DIRECTV HD DVR/Receiver Discussion' started by Mike Bertelson, Jan 9, 2013.
You could say so:
My Genie Pet Peeve is now over a year old.
Issue: Recording Deletion via More Info - Deleting Remote Recording from the Program's More Info screen doesn't always take you back to the PlayList. Instead, you are often booted to Live TV or some other GUI screen that's not the PlayList. This bug is a known issue that been around since Genie was on the SDGUI.
My box now says the same thing. At least this time I didn't need to reboot to see the other box in the whole home setup.
After the lastest update my 3D channels show side by side split screen. Anyone else having this problem. RBR didn't correct it. Any ideas ??
Yes I've seen this, only work around for me at the moment is to manually switch the TV to SBS mode.
My 3D channels have always been side by side split-screen.
If you have a C31 or Samsung RVU client yes you can probably ignore that error. It looks like every time the HR34 detects the client being turned off it logs that as a dropped connection. Hopefully someday they'll be able to figure out that it's being caused by the power off and not increment the dropped connection counter.
I couldn't stop, pause, or get out while watching a recorded show. Tried two different remotes. I even tried to shut-off HR34 from front panel. Finally had to do RBR.
Diag all report 20130110-2F17
Same thing happened to me, but a few days before this upgrade.
Lost all my OTA locals as well, and had to reboot the AM21, as well as the HR 34.
No problems since.
Still waiting for the abilty to listen to Pandora while watching a channel.
The "Already recording" and "Keep it/ Delete it" misinformation finally went away for me. The little arrows at the top and bottom of the playlist are back.
Thanks for the explanation. I reset my HR34 this morning. It now works better than any DTV receiver I have ever had. Quick and stable 30 second skips. No hangs or audio dropouts. No lip sync problems. I am finally a happy camper. Latest update sure made a difference. Still have the 79 error, but with your explanation I have a little more insight into why.
What is up with the fast forward at 3x? Every single time it is ahead when you hit play for the show to resume at the area you want it back on. I have to back it up. So annoying. 2x does not have this problem.
Just noticed my C-31s updated over the last 24-48 hours. The new software is version 0x70e ad is dated 12/21. But I checked this last about 2 days ago and was the version before this.
I had this same error on my system when first installed. I had read here that the 34 didn't need the external deca device, but instead to use the built in Ethernet. The installer (who did a GREAT job) insisted that they had to use the external device. I said "ok" and when tested in that configuration I too had the dropped connections. After I disconnected the Deca device and instead plugged the Ethernet cable directly into the 34, the problem went away. Since then it's been problem free. I only have the one HR34 and one client, so I don't have any other receivers to support, but if you have a wired connection available at the HR34 you might try plugging in the network there instead of over an external device - if that's not already done.
Keep or Delete? Press Select and we'll surprise you.
Report #: 20130111-3313
Issue: Screen Saver Out of Standby / Audio Through Screen Saver
My HR34 downloaded the new version on Wed. morning. I didn't turn it on until this morning. It was in standby mode. When I brought it out of standby, the TV showed me the Downloading Guide Info Page 2 of 2 screen. It was only up for a moment before it switched to the screen saver, although I could hear the audio of the show that was currently playing. Hitting a button on the remote brought me to LiveTV.
My installer also says I need to use the DECA device. Should I plug into the ethernet port on the HR34? I remember having a network connection issue when the ethernet was plugged in right after installation, but perhaps having the DECA also plugged in was causing a conflict...
You can use either the external DECA or the HR34's Ethernet port but ONLY one or the other, never both.