1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Moving my power inverter

Discussion in 'DIRECTV General Discussion' started by luscombe, Jul 17, 2013.

  1. jimmie57

    jimmie57 Hall Of Fame

    6,638
    320
    Jun 26, 2010
    Texas City, TX
    If you are getting 21 volts on the line in the new place you are moving the receiver to.

    Leave the power inserter where it is,
    move the receiver only,
    unplug the power inserter, unplug the other receiver,
    plug in the power inserter,
    plug in each of the receivers.

    I have seen posts that you can get the 775 error if the receiver has power before the power inserter is plugged in.
     
    1 person likes this.
  2. Stuart Sweet

    Stuart Sweet The Shadow Knows!

    37,060
    287
    Jun 18, 2006
    The issue here is that only one port of the splitter will pass power back to the dish. It's the one with the red center. It seems like what you need to do here is find the cable that runs from the room where you want the power inserter, and make sure it is connected to the port on the splitter with the red center.
     
    1 person likes this.
  3. luscombe

    luscombe New Member

    8
    0
    Jul 17, 2013
    Georgia
    This is it problem solved, THANKS:)
     

Share This Page