1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. Welcome to the new DBSTalk community platform. We have recently migrated to a community platform called Xenfono and hope you will find this change to your liking. There are some differences, but for the most part, if you just post and read, that will all be the same. If you have questions, please post them in the Forum Support area. Thanks!

Need a little help with ongoing install

Discussion in 'DIRECTV Connected Home' started by jagrim, May 21, 2010.

  1. jagrim

    jagrim Hall Of Fame

    Aug 25, 2006
    Have SWM 16 with (2) sws4 splitters. The 29 volt power supply is hooked up to the middle adapter on the SWM 16. Power supply only has (1) output.

    All have DECA adapters installed

    I will use names instead of STB type:

    Study sees ASA
    Asa sees Study

    LR sees GR, MBR, & H
    H sees GR, LR MBR
    MBR sees GR, LR, H

    Asa & Study are on different SWS splitters so there is DECA transfer across the SWM1 & SWM2 ports.

    Any ideas???
  2. veryoldschool

    veryoldschool Lifetime Achiever Staff Member Super Moderator DBSTalk Club

    Dec 9, 2006
    The HR20-100s don't like playing nice without a DECA to router bridge for the router to send DHCP IPs.
  3. jagrim

    jagrim Hall Of Fame

    Aug 25, 2006


    I hooked up the router and all see ASA but ASA does not see. Have reset Asa and will see if that brings him totally back.

    Now if they finish up with the H24, I'll almost be set.


Share This Page