1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. Welcome to the new DBSTalk community platform. We have recently migrated to a community platform called Xenfono and hope you will find this change to your liking. There are some differences, but for the most part, if you just post and read, that will all be the same. If you have questions, please post them in the Forum Support area. Thanks!

Playback failed. No audio/video data packets received from server SOLVED!!

Discussion in 'DIRECTV Connected Home' started by xrism, Dec 14, 2012.

  1. xrism

    xrism New Member

    3
    0
    Dec 14, 2012
    Its just a loose cable. The 10 inch cable that goes from your HD-DVR to the little adapter box that has the ethernet cable and is attached to the cable from the wall. That small cable is loose. Tighten the end that attaches to the small adapter box. The part with the rubber sleave should be tight and not twist at all. After you tighten, you will see the power and th network light stay a solid green. Its good to tighten the same on all boxes.

    I was troubleshooting for hours, reboot, reset, manual IP programming. All it was was a loose cable. Goes to show that you have to do the basics before anything.
     

Share This Page