1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

VIP622 and 722K installation

Discussion in 'ViP612/622/722/722K DVR Support Forum' started by khichadi, Sep 28, 2010.

  1. khichadi

    khichadi New Member

    2
    0
    Sep 28, 2010
    I have one VIP622 (dual tuner HD/SD) at my home. I need another HD receiver and received 722k. I have one cable coming from my switch (DPP44) to room where 722k wil be installed (same as 622). I want to make sure about installtion part. I guess I need to use dish splitter and connect two cables to two tuners (same as 622). Do I need to change any LNB etc...Dish guy was telling me that I may not get two HD chnnels at the same time on two receivers. That doesn't make sense. is he correct? I have a big dish with 4 lnb (119, 118, 110, 129) and on 622 I get everything including local HD. I am not interested in OTV at all.
     
  2. Jim5506

    Jim5506 Hall Of Fame

    3,660
    36
    Jun 7, 2004
    You need to run a single cable from the DPP44 to the new receiver then use a SEPERATOR behind the receiver to seperate the stacked signals to the two tuners.

    Your DPP44 can supply signal to 4 receivers with no problem.

    I have no idea what the Dish guy was talking about either, each receiver is independent and able to tune any channel you are subscribe to. AFAIK you can tune all 4 sat tuners to the same channel.

    He may have been alluding to the fact that the second output from each receiver is always SD, who knows.
     
  3. khichadi

    khichadi New Member

    2
    0
    Sep 28, 2010
    Thanks
     
  4. mountaintop

    mountaintop Mentor

    46
    0
    Oct 2, 2010
    If I can ask two question here also. New Dish network user second day. Directv now hates me but my tree love me.(eastern Arc)

    I have a new 722 and two 622 all being feed straight from the dish it looks like in the attic. Each coax runs to one of the receivers.

    If I want to add a receiver can I add a diplexer to one of the three coax? I'm use to a swm or switch inside the attic.

    Can I add a separator to get the Home Distribution output from the 722 back into the coax and pull it back out with another on at the 622. I see mention of a dp separator but not sure what I need.

    Thanks. everything is working and don't want to screw it up now. I can run a new coax from the 722 to the 622 but many walls exist and maybe the way.

    I will say the installer did a great job as I had three tivos and one HD dvr(broken) and helped me get my sound system running. ONE big pile of extra cables and open slots in tv stand maybe for a PS3?
    If there is a place to look and read please point me to better understand this new system. Old directv system was 5 years old.
    thanks
     
  5. BobaBird

    BobaBird EKB Editor

    4,022
    0
    Mar 30, 2002
    Each receiver must have its own line from the switch. The one built in to the Dish 1000.2 and 1000.4 has only 3 outputs. The way to add a receiver is to run the 3 lines from the dish to an external DPP44 switch, or you could put up another dish if that's easier than running a line from the first dish.
     

Share This Page