Welcome to DBSTalk
Like most online communities you must register to view or post in our community. Sign-up is a free and simple process that requires minimal information. Be a part of our community by signing in or creating an account. The Digital Bit Stream starts here!
- Reply to existing topics or start a discussion of your own
- Subscribe to topics and forums and get email updates
- Send private personal messages (PM) to other forum members
- Customize your profile page and make new friends
Posted 19 April 2002 - 07:44 AM
||...Ads Help To Support This Site...||
Posted 19 April 2002 - 07:51 AM
Posted 19 April 2002 - 08:17 AM
The 501 downloads the guide automatically when you put it in standby mode (i.e. turn it off with the power button on the remote). I believe (haven't tested this myself) that you can also leave it tuned to one of the channels that is on transponder #1 off the 119 sat (channels 106, 107, 108, 162, 184, 208, 209, 230, 239, 304, 426) and it will update your guide data. If all else fails, scroll out in your guide until you get to the dreaded no information available blocks, then try to pull up program information for one of them - that should force the guide to be updated.
Posted 19 April 2002 - 08:45 AM
Posted 19 April 2002 - 10:19 AM
"In an effort to increase your cable and satellite bills beyond the point of affordability and to further pad the pockets of our executives..."
Check out my list of links.
Posted 19 April 2002 - 11:44 AM
Posted 19 April 2002 - 03:04 PM
Originally posted by Mark Lamutt
Is it only on 110? If so, then he'd need to set the channel to one of the TP1 channels on 110.
Actually the Extended EPG (9 Day guide) that the 501 uses comes from Transponder 3 at 110 degrees.
Channels that are also on this transponder are Gem Shopping Network (Part Time) and 8 PPV channels as well as Dish's Interactive Home Channel.
BTW my Avatar is the reason I get Distant Nets even though I'm in a Grade A signal Contour. I love Dish's RV/Commercial Trucker Waiver Program.
Posted 19 April 2002 - 06:18 PM
Posted 19 April 2002 - 09:12 PM
With the dish 500 antenna, you are actually pointing at 2 different satellite locations - located at 119 degrees and 110 degrees (orbital slots). On those satellites are the transponders, from which the channels are beamed back to earth. Each transponder has a number of channels on it - I think an average of about 11 channels per transponder is what dish is doing at the moment. So, the channels that I listed in my post above are the channels that are being broadcast from the 110 degree satellite on transponder 3. Make a little more sense?
Posted 20 April 2002 - 12:20 PM
Posted 24 April 2002 - 03:33 PM