Welcome to DBSTalk
Like most online communities you must register to view or post in our community. Sign-up is a free and simple process that requires minimal information. Be a part of our community by signing in or creating an account. The Digital Bit Stream starts here!
- Reply to existing topics or start a discussion of your own
- Subscribe to topics and forums and get email updates
- Send private personal messages (PM) to other forum members
- Customize your profile page and make new friends
How accurate is Dishpointer.com (IE line of sight checker)
Posted 16 June 2010 - 02:14 PM
According to Dishpointer.com and using the google earth app at the bottom of the page, I should in fact have clear line of sight. (at least from somewhere at my house, perhaps not necessarily where it's at now) Is this normally pretty accurate?
Thanks in advance. I eagerly await my tech coming on Saturday and hope to have my issues resolved at that point. I truly do appreciate all the help and advice you all have provided.
||...Ads Help To Support This Site...||
Posted 16 June 2010 - 03:36 PM
- you need to position the pointer where your dish actually is (or will go)
- you need to pull down the individual orbital locations for all sats you intend to pick up from that location, not just the sat the dish is actually aimed at (i.e., the center one).
- you need to give 3-5 degrees on either side of the extreme outside sats to ensure clearance and to make sure you don't have tree branches blowing in the way.
Posted 16 June 2010 - 04:15 PM
Posted 16 June 2010 - 04:50 PM
On the dishpointer website, it only allows me to zoom in twice before saying "We are sorry, but we don't have imagery at this zoom level for this region. Try zooming out for a broader look." When I click on the google maps link and the 3d app comes up it allows me to zoom in a lot closer, but it's so blurry when I get close, that I can't even tell if it's actually my house that shows up (that could be in large part because my monitor isn't very good and doesn't work well except in the lowest of resolutions.)
I think I'm going to try to clear as many branches as possible, just in case these next couple of days.
If you, or anyone else for that matter want to use google streetview the address is 2718 E 11th Joplin, Mo 64801 that would give you at least a general idea of just how many trees are around. Also this link 'may work' as a direct picture to the location.. not sure. (tried it on my computer and it worked anyway, it came up as 2716 instead of 18.. but it is in fact the correct house and the picture is facing the south.
I am also now checking individual satellites.... So far so good on that front.
Edited by colt45allstar, 16 June 2010 - 05:00 PM.
Posted 16 June 2010 - 10:39 PM
Posted 17 June 2010 - 06:07 PM
I took the time to label one "current location" as that particular shot is from right next to the dish's current location.
Hopefully the situation doesn't appear to be as dire, as what I fear it might be.
Edited by colt45allstar, 17 June 2010 - 06:30 PM.
Posted 19 June 2010 - 06:40 AM
Site does look difficult but would need to walk off all options to be certain.
Some gaps present so possible.
Joplin , new DMA, uses KA-MPEG4 for locals. 99/103 possibly off new D12 and thus only needs LOS in small arc 99 to 103. ( assumming no spanish or international program requests.)
Some tree trimming would also likely help.
MFH-2 System : 2 Major Viewing Areas. 2 x HR20-700's & H21 in each area via E2/SWM-8. Hardwire gigabit switch to 30 mb/sec internet.
Posted 19 June 2010 - 05:59 PM
He said that the trees were perhaps going to be a problem, but he replaced a bunch of things... various cables, the multiswitch and finally the lnb (replaced my 5 lnb with a 3 lnb.) He also did a slight realignment.
I am now back in business! The signals are even a lot stronger than what they were prior to the problems starting.
The ones that were primarily in the upper 80's and low 90's on signal are now mid to upper 90's. Even saw my first 100 on The "SWM" setting when doing a signal test.
Directv 10 and 12, which were both incredibly low before, are still not great (likely due to the tree branches) but are leaps and bounds better than before. I was getting mostly 40's and 50's on one, with a random 30 or two. The other one was mostly 50's and 60's, with a a random 40 or two.
They are now between mid 70's to low 80's on all transponders. I'm quite pleased overall.
Thanks for all the help!