Welcome to DBSTalk
Like most online communities you must register to view or post in our community. Sign-up is a free and simple process that requires minimal information. Be a part of our community by signing in or creating an account. The Digital Bit Stream starts here!
- Reply to existing topics or start a discussion of your own
- Subscribe to topics and forums and get email updates
- Send private personal messages (PM) to other forum members
- Customize your profile page and make new friends
Posted 25 January 2011 - 11:21 AM
||...Ads Help To Support This Site...||
Posted 25 January 2011 - 11:29 AM
Right, the spread between LNBs is greater for your location.
I retrofited a SWM LNB on this dish before but was only able to pickup either 99 and 101 or 101 and 103. So that is why I got the correct bracket and LNB for this dish
Posted 25 January 2011 - 02:31 PM
Posted 25 January 2011 - 02:39 PM
not nessesary if not directed to
how about the 110 and 119 ports do I put terminators on them?
Posted 25 January 2011 - 02:42 PM
I now have signal on 101 trans 2 and 10. 72% and 76% and 6 or so transponders on 103c in the 40s. Nothing on 99 and 103b
Try to add half-conus from alumiinum foil to left and right sides of a plastic cap what cover the triple feedhorn. Or try oval cone to the cap.
Posted 25 January 2011 - 03:09 PM
Posted 25 January 2011 - 03:24 PM
Posted 25 January 2011 - 03:32 PM
I now have signal on 101 trans 2 and 10.72% and 76% and 6 or so transponders on 103c in the 40s. Nothing on 99 and 103b
6 or so transponders with reading in the 40s on 103c, but nothing on ... 103b?
The Ka signal categories for the HR2X receivers should be 99s, 99c, 103s, 103ca, 103cb.
Anyhow thanks doctorj for the info. As I strongly suspect though the 110/119 AL/HI kit is essentially a nonintegrated discrete component equivalent of the AT-9 sidecar unit.
Posted 25 January 2011 - 04:45 PM
the transponders are 101, 99c,103ca, and 103b
Posted 25 January 2011 - 08:40 PM
It's for test to see if you could make 3xLNBF block works with the big reflector.
Edited by P Smith, 26 January 2011 - 01:19 AM.
Posted 25 January 2011 - 09:19 PM
I mean to make new [actually extend existing] feed horn with bigger entrance to collect signal from sides of your current triple LNBF (99/101/103) due different focal points' location for a reception of Ka sats..
I think you owe me a new monitor now. Now that I've spit my throwback Pepsi all over it. That's the funniest thing I've read all day.
Extending the feedhorns with tin foil? Really? :icon_stup
Having issues with your HD locals? Report them here: Click Me
Is your receiver compatible with MRV? Check Here