I have two 722k receivers, one in the living room and one in my theater room. They both operate second TV's in other rooms. I recently had to get a replacement for the 722k in the living room. It took me awhile to figure this out, but once I got the 722k replacement, my universal remote in the theater room began working very poorly. If I unplug the 722 in the living room, the remote in the theater works normally again. I never had this problem with the first 722k.
My remote in the theater room is a Universal Remote Control MX800 operating RF with a MRF250 base station. All my components are controlled RF from the remote through the base station, and via the IR emitters placed over the component IR sensors. I have tried moving the emitter going to the 722 all over the place to make sure the sensor isn't getting overloaded but nothing helps.
Has anyone run into a similar problem or has a fix?
Welcome to DBSTalk
Like most online communities you must register to view or post in our community. Sign-up is a free and simple process that requires minimal information. Be a part of our community by signing in or creating an account. The Digital Bit Stream starts here!
- Reply to existing topics or start a discussion of your own
- Subscribe to topics and forums and get email updates
- Send private personal messages (PM) to other forum members
- Customize your profile page and make new friends
Guest Message by DevFuse
Replacement 722k now interfering universal RF remote
No replies to this topic