Welcome to DBSTalk
Like most online communities you must register to view or post in our community. Sign-up is a free and simple process that requires minimal information. Be a part of our community by signing in or creating an account. The Digital Bit Stream starts here!
- Reply to existing topics or start a discussion of your own
- Subscribe to topics and forums and get email updates
- Send private personal messages (PM) to other forum members
- Customize your profile page and make new friends
External Drive Not Attached - 622
Posted 01 February 2012 - 12:40 PM
Dish tech support says the drive has to be in its "out of the box" state, i.e., has not been formatted for an operating system's use (FAT/NTFS, Linux, et. al.).
When asked "Is there a way to get the 622 to format it", answer was "no".
Aside from buying a new external drive, does anyone know of a way to get this drive to work?
||...Ads Help To Support This Site...||
Posted 01 February 2012 - 01:28 PM
Posted 01 February 2012 - 02:40 PM
"The drive must be 50 MB to 2 TB in size; must have its own power supply; must be single tiered, and can't be a flash drive"
If by "single tiered", you mean the drive is all rotational and not "part solid state and part rotational", then yes, the drive meets all of these requirements.
The "Level 1 tech" put me on hold while he talked to an advanced support rep, so I took him at his word about the drive having to be in an unformatted state. From your note, it seems that is not the case, though.
I have since connected to my PC and it is still accessible from Windows Vista 64, and also from a Linux machine, so it looks like the drive is working.
Posted 01 February 2012 - 03:30 PM
Posted 01 February 2012 - 03:46 PM
After Ray C's reply indicating that an un-used drive is not required, I connected the drive to a 722K. It was recognized, gave me the "...format required" and "...are you sure" messages and then formatted the drive.
Connected to the 622, and it was recognized. I could copy a recording to the drive.
The only thing I can think of is there must have been "something" in the NTFS-formatted drive's handshaking that the 622's software did not recognize. (622 software Level L710).
Paul, thank you for the MBR-to-0's suggestion. I have another old external drive that I'll try that on.
Thank you both for your help, and please consider the problem resolved.