Welcome to DBSTalk
Like most online communities you must register to view or post in our community. Sign-up is a free and simple process that requires minimal information. Be a part of our community by signing in or creating an account. The Digital Bit Stream starts here!
- Reply to existing topics or start a discussion of your own
- Subscribe to topics and forums and get email updates
- Send private personal messages (PM) to other forum members
- Customize your profile page and make new friends
cckw webpage config
Posted 18 April 2012 - 02:33 PM
(directv cinema connection kit wireless)
Can any one tell me how to do this ?
I looked all over and cant find info on this but I was advised it can be done.
Posted 18 April 2012 - 03:27 PM
Here's the procedure:
Do NOT connect the CCK-W to your router.
Connect the CCK-W via ethernet to a computer that is not connected to the internet. Straight cable, not a crossover.
Browse to http://169.254.1.100:8080. (It may be necessary to set the computer's IP address to 169.254.1.101 and the gateway to 169.254.1.1)
Username and password are both admin
Beyond that, it's all browser based. If you want to configure it that way, you're probably well versed in networking so you won't have a problem.
After you've done that and connected to the coax network, you should have four green lights; one may flash slowly. You can consult your router's DHCP table to get the device's new IP address, and should you need to administer it, browse to http://assigned_ip_address:8080
those of DBSTalk.com, DIRECTV, DISH, The Signal Group, or any other company.
Posted 18 April 2012 - 03:36 PM
Edited by mrjussellr, 19 April 2012 - 10:05 AM.
Posted 08 July 2012 - 10:29 PM
Edited by mrjussellr, 08 July 2012 - 11:15 PM.