Welcome to DBSTalk
Like most online communities you must register to view or post in our community. Sign-up is a free and simple process that requires minimal information. Be a part of our community by signing in or creating an account. The Digital Bit Stream starts here!
- Reply to existing topics or start a discussion of your own
- Subscribe to topics and forums and get email updates
- Send private personal messages (PM) to other forum members
- Customize your profile page and make new friends
Not receiving transponders from Satellite D9S
Posted 08 May 2012 - 04:11 PM
Craig in CA.
||...Ads Help To Support This Site...||
Posted 08 May 2012 - 04:22 PM
Zero signal on even transponders usually indicates a cable/connector problem. Even transponders are selected by the receiver putting an 18v signal on the line to the dish, odd transponders 13v. If there is a poor connection, there could be too much voltage loss and the 18v could be dropping below the threshold needed to select evens, so you will not see them.
I have a Single LNB mobile antenna in my motorhome. It locks on DTV 101W just fine, but I only receive stations from the D8 satellite. I receive nothing from the D9S satellite. All the ODD transponders are good, but all the EVEN transponders show 0 (zero). Why am I not receiving anything from the D9S satellite. I have talked to Direct TV more than once and their tech dept is no help.
Craig in CA.
Posted 08 May 2012 - 06:22 PM