Welcome to DBSTalk
- Start new topics and reply to others
- Subscribe to topics and forums to get email updates
- Get your own profile page and make new friends
- Send personal messages to other members.
How to Program RC65RX for IR and RF ?
Posted 04 September 2012 - 06:17 PM
The DirectTV STB is located inside the Entertainment center and so I am using RF to control the STB . But the Boston Acoustics TV-25 soundbar is controlled by IR . How do I program the Remote so that the On button will turn of the TV ( by RF) and turn on the Soundbar by IR ?
Posted 04 September 2012 - 06:31 PM
All other items are getting IR signals.
There are no codes listed for Boston Acoustics audio items.
You may still find a setup code that works for your device by stepping through the library codes in your remote. The following instructions will help you do this.
Set the "Mode Switch" to the desired mode such as TV for a Television.
Press and hold the "Mute" button and the "Select" button until the visible LED blinks twice.
Enter the code " 991 " followed by the "device number"
1 for Televisions
2 for "AUX 1" devices - VCRs or DVDs
3 for "AUX 2" devices - Audio
You can step through the setup codes for this mode by pressing the "Channel Up" key to go forward through the codes or pressing the "Channel Down" key to go back to the previous codes.
You can try out each code by pressing one or more function keys such as power, volume or digit keys.
When you've found the setup code that works for your device, press the "Select" key.
DirecTV customer since 1996 - Current :Slimline 3 SWM, HR24-100 HDMI to 32" Sharp LED,
HR24-100 Component cables to 46" Samsung LCD & Optical Cable to Yamaha AVR, H21-200 HDMI to Yamaha AVR & HDMI to 52" Mitsubishi LCD
Posted 04 September 2012 - 09:58 PM
For the Boston Acoustics Soundbar, I have to program the Soundbar using my original TV Remote by going through a learning sequence. Then it will work with the RC65RX remote.