Welcome to DBSTalk
Like most online communities you must register to view or post in our community. Sign-up is a free and simple process that requires minimal information. Be a part of our community by signing in or creating an account. The Digital Bit Stream starts here!
- Reply to existing topics or start a discussion of your own
- Subscribe to topics and forums and get email updates
- Send private personal messages (PM) to other forum members
- Customize your profile page and make new friends
Dish Network 1000.2 Dish and Pro Plus Triple LNB 1000.2
Posted 27 March 2013 - 01:47 PM
Will this dish/receiver combo work together?
Can I hook the cable from the input on the receiver directly to port #1 on the LNB or do I need another piece of hardware in between?
Is there anything else that I need to be aware of about pointing this dish?
My locals are from Pittsburgh, PA and are located on the 129W satellite for HD and the 110W satellite for non HD.
Thanks for any help.
Posted 27 March 2013 - 01:51 PM
Posted 27 March 2013 - 01:56 PM
I'm sure that this is a dumb question but are the settings the same for a 1000.2 & 1000.4 for pointing at the 110 119 & 129 SATS?
Posted 27 March 2013 - 01:58 PM
Posted 27 March 2013 - 02:24 PM
Posted 29 March 2013 - 09:37 AM
Thanks. Tested it yesterday and it worked flawlessly. Up & running in 10 minutes or so.
set tilt by dishpointer, close 110/129 by aluminum foil, get the 119, then open 110/129 and check these, then go with fine aiming
Posted 29 March 2013 - 11:05 AM