Welcome to DBSTalk
- Start new topics and reply to others
- Subscribe to topics and forums to get email updates
- Get your own profile page and make new friends
- Send personal messages to other members.
Single Hopper (no Joeys) AT120+Willow Cricket HD Installation questions
Posted 18 November 2013 - 07:16 PM
Posted 18 November 2013 - 10:58 PM
You will get a 1000+ dish (pulls in 110/118.7/119/129.) Two cables are required from the dish to the node. From there there is only one cable from the node to the Hopper. They can put a Solo Node at the dish, two feeds to the node from the dish, they should put a 75-ohm terminator on the CLIENT port of the node, then run a cable from the HOST port to the Hopper. The feed between the node and the Hopper requires 3GHz of bandwidth. Since you said it is a new house chances are they can use the existing RG6 (ONLY RG6) with the exception that they may need to replace the connectors and remove any cable equipment (splitters etc. .)
Hopper doesn't show the 9xxx duplicates, so you should be looking for channel 712 to find Willow Cricket HD.
2 Hoppers w/Sling / 2 Hopper 2000s / 1 Joey
1 ViP722k (separate account)
Posted 18 November 2013 - 11:07 PM
Excellent. Thanks for the help!